r/240sx • u/Titantethar • 5h ago
Need a straight hood in CO
Does anyone have or know of someone who has a straight s13 hood for sale in Colorado? Its the final thing I need to straighten my front end.
r/240sx • u/Titantethar • 5h ago
Does anyone have or know of someone who has a straight s13 hood for sale in Colorado? Its the final thing I need to straighten my front end.
can only get in gears on jackstands. first and second sound fine but in third gear i get this sound coming from the bottom of the car. on the ground it won’t go into gear too.
just installed a fully new clutch kit and replaced the pilot bearing to try and solve it this weird “no gear” issue. maybe it’s something simple?
r/240sx • u/sibueno42 • 16h ago
Testing new Camera angles and mic setups, SR20DE 150hp. Full video in comments
Installed this transmission and had to disassemble and reassemble it 3 times to make sure we were doing everything right. I wasn’t able to go into gears for some reason and got grinding every time. I reassembled and bought all new parts for it.
now i’m able to go into gears ON JACKSTANDS and it’s super tough. still unable to go into gears when the car is on the ground. This video is what happens when i’m in third gear on jack stands.
also important to note that the clutch fork is pretty stiff. definitely mobile but stiffer than my boys 240 for sure. bled the clutch completely multiple times.
what is this sound? has anyone had this problem before? i think maybe my slave is bad since i already inspected the clutch fork and it looks fine. maybe its having trouble disengaging the clutch?
r/240sx • u/Tiny_Tumbleweed_3087 • 20h ago
Hey Y'all, I'm losing my mind chasing this lean condition and I need some input. It starts up great and will idle around 12-13 AFR, but will gradually lean out to 18-20AFR until it sputters out and stalls without constantly blipping throttle. It does not always do this, sometimes it'll idle great at 14.7 with NO changes or inputs. Same thing while trying to drive the car, randomly it will lean out to 18+AFR while cruising or under load, and other times will be spot on at 11-12 at WOT or 14-15 cruising. I've re-calibrated the TPS, re-grounded the MAF, boost leak tested up to 20psi flawlessly, no idle jumps from hosing the damn intake manifold and throttle body with brake cleaner, I've cleaned the maf and it's connectors, replaced all the fuel components, and I've tried combos of unplugging o2 sensor, temp sensor, and iacv, with no luck. Forcing the iacv/aacv shut helped a bit but gave up after a few mins of driving. Capped off the brake booster vacuum line aswell, healthy leakdown test and compression, burns some oil though.
Yes, I've dug through every forum post I can on it find already (RIP Zilvia)
For context, here is all the details on my setup;
1989 240sx (originally auto) swapped with unopened blacktop s13 sr20det and sr 5spd
E6 ecu from automatic 180sx s13 blacktop
New s15 t28 turbo (at wastegate pressure, no boost controller)
PBM FMIC, Intake kit
New PCV valve, GKtech catch can kit
New Nissan OEM FAT o2 sensor
New DW200 pump, New DW 370cc Injectors, New z32 fuel filter, WS fuel relay kit, NEW Tomei FPR (@ 47 psi at idle with reference unplugged)
New Aem Uego wideband gauge kit
New PBM Cobra downpipe, 3in straightpipe back
New NISMO BKR7E, New P2M Coils
Any input is appreciated, Thanks !!!
r/240sx • u/BarraxOfficial • 1d ago
When I found this S13 abandoned with no wheels sitting on the floor, one of the first things I noticed were the Z32 calipers in the rear and no front calipers but a 2 piece rotor. Dave Coleman originally used rear Z32 knuckles with the entire drum shoe and calipers assembly and Brembos up front. Since this will be a car for me to enjoy and not go wild on a track, I felt that Z32 all around would be more than enough. Rebuilt the rears the were found on the car and got some new refurbished front calipers. A not so great paint job later and they were looking great! Paired with some Rofu rotors and Z1 brake pads. Also got a all new hardware and shoes to maintain a working E Brake. Used GK Tech conversion E Brake cables along with their conversion plate which made things so easy to route. No stretching of the cables. Also used GK Tech conversion brake lines which I will pair with their engine bay brake lines when we get to the point. Still haven't decided to run a booster or not or what booster to use. Obviously a 300zx booster and master would be ideal but we gotta see clearance first after we see where the exhaust manifold will sit. Stuff for the future I guess.
r/240sx • u/Rinolmao • 1d ago
I got a 92 240 my tire size is 195/60r15 and I want tires that are good at improving ride quality and decreasing bounciness because I have some pretty shot suspension (yes I’m aware my best bet is to just fix my suspension but I will get around to it eventually and need tires now) but can handle around 125-130 well
I had recently bought an s14 and gotten everything pretty much up to speed. New transmission new clutch kit (White Bunny). New throw out bearing that came with the kit too. Put everything together and gave her a start today on jackstands just to test for leaks but it seems i can’t shift into gear or start the car while on the clutch. Had my girlfriend try to clutch in while i held the wheels and the car didn’t bog or stall or anything. i’ll attach some info in case anyone has any idea what’s going on. i’m thinking that maybe the clutch is backwards.
- installed a new throw out bearing that was different to my original but it came with the White bunny kit so i didn’t think much of it
- White bunny kit was a single disc not a pucked clutch
- clutch fork was insanely tight when i installed it in the transmission
- Bled the clutch and everything feels how it should nice and firm.
- to start the car i had to push the clutch safety switch to bypass the clutch not disengaging it seems like.
Still pretty new to the scene but tomorrow morning I’m going to take off the transmission and check everything but if anyone knows what might be up, please lmk!
r/240sx • u/Slumpweenie • 2d ago
I recently changed a coolant hose under the intake manifold and this hose started leaking shortly after. All the hoses are pretty old so I’m not surprised. I haven’t had much mechanical experience but I’m looking to do everything myself so how hard is it to take the intake manifold off so I can replace all the old hoses underneath. This one seems too hard to get to without taking the top portion of the intake manifold off.
Are there any threads explaining how to take it off or videos? Any help or advice would be much appreciated thank you!
r/240sx • u/TheBestChassis • 2d ago
We’re building something for the Nissan S-Chassis community.
The Best Chassis is focused on developing and manufacturing quality replacement and aftermarket parts for the Nissan S13, S14, and S15 platforms.
From hard-to-find OEM-style replacement components to chassis reinforcement and drift-focused upgrades, our goal is simple: keep these cars on the road, on the track, and alive for the next generation.
S13 / S14 / S15 parts
OEM-style replacements
Chassis components & fabrication
Drift and performance parts
New product development
We’re just getting started, and there’s a lot more in the works.
Follow along as we bring new products to life.
THE BEST CHASSIS
Built for the chassis. Made for the culture.
r/240sx • u/rredmann12 • 2d ago
New ish to 240’s I’ve got an 89’ coupe I’m partially restoring and partially wanting cool shit for but it seems like the prices from the big websites are pretty drastically different just looking for more options!
r/240sx • u/International-Log590 • 2d ago
Running a 96 S14 (Zenki) with Z32 front brakes and MaxPeePee coilovers (soon to be swapped out for a much nicer suspension), lowered about 1" from the photo. Want to downsize from the 18s to 17s for a little more sidewall.
CURRENT (flush, no rubbing)
- Strada Palo 18x8.5 +30, 225/40/18
- GKTech hubcentric spacers: 10mm front, 15mm rear
PROPOSED
- Enkei RPF1 17x9.5 +38 (73mm bore), 255/40/17 all around
- GKTech hubcentric spacers: 5mm front, 10mm rear
- Based on my guestimates, that keeps the outer wheel/tire in about the same spot as now, but the inner barrel and tire shoulder move roughly 25mm closer to the struts and control arms.
QUESTIONS
Has anyone run RPF1 17x9.5 +38 on an S chassis with Z32 brakes? Any caliper clearance issues?
Front inner clearance at full lock with a 255 (strut, tie rod, control arm)?
Rear inner clearance with a 255, and is a 275 (future size goal) realistic without pulling fenders?
Would you shift the spacer sizes or change the offset?
Thanks!
Hello I am losing power in 3rd and 4th gear after 3500rpm. I have constant fuel pressure, only code 55 pops up on the ecu.
No peddle feeling until rpm dropped to 3k. Power returns after up or downshifting.
I’m at a lost to what is causing this. Check engine light is constantly on but only code 55.
r/240sx • u/xdkumquatz • 3d ago
My 96’ Zenki KA-T streetcar
r/240sx • u/SoggySpartan_ • 3d ago
I was doing some research on a new speed sensor for my MT 1990 S13 hatch I picked up recently, and a forum from 2009 mentioned that the speed sensor for the KA24e 240 trans is different than the refresh s13 and S14 KA24de trans speed sensor. I guess they said it’ll fit but will read double the speed or something along those lines? Not sure if I’m allowed to post links but the forum post was on NICOclub titled ‘240sx Speed Sensor tutorial’.
Rock Auto only has one speed sensor for all s13s and I can’t seem to find a sensor for exclusively the 89-90. All that to say, does anyone know if the 91+ speed sensor will work in my 90? If not, where can I get one that will work?
r/240sx • u/ImpossibleCat3826 • 3d ago
So pretty much my big question is what is no longer needed electronically in my car since it is not an automatic. I’ve seen the previous post about deleting the resistor on the driver side wheel arch as well as removing a small green box above the brake pedal. Are there any other items like that and does removing them cause any issues?
r/240sx • u/Then-Opposite3733 • 3d ago
Recently got my hands on a clean stock hatch but sadly it has a ka24e which Ina way is a blessing cause I want to daily it and I feel like it’s an easy engine but I’ve never had one so if anyone has any advice on what to do asap please let me know !!!
r/240sx • u/o_O____-_- • 3d ago
I converted auto to manual. 320whp. Car is super clean, so I don't want to be hammering the tunnel to fit a CD009. Is going with an OS-Giken gear kit or a Nismo transmission a good idea for someone like me? Once my engine is built, I should be around 450whp MAX, but I'd prefer the street tune to be around 380-400. 6 speed appeals to me for highway cruising.
r/240sx • u/No-Price-8232 • 3d ago
has anyone compared these two before or attempted to put a s14 ebrake lever into s13?
I compared the photos online and the bolt mounting is literally exactly the same, the rear T bracket, where it attaches to the cables, looks exactly the same too.
Has anyone ever tried this?
Reason being an used s13 lever is like $100+ and they still sell s14 lever brand new for roughly $120 lol...