r/22lr • • Sep 23 '24

1,250 rds for $63.14 the dude screwed up and wrong 15 instead of 25 boxes . I’ll take it though cause I’m poor.

Post image
0 Upvotes

r/22lr • • Sep 07 '24

Playing with my new mauser ak47! Legit sounds like a toy compared to everyone elses gun!🤣😭

35 Upvotes

r/22lr • • Mar 25 '20

Crow at 95 yards with the Ruger.

Post image
5 Upvotes

r/22lr • • Feb 09 '24

502 @50y

2 Upvotes

r/22lr • • Dec 15 '24

Benefits of Owning a 22lr

0 Upvotes

22lr = Fun, Economical, and Easy to Shoot.

A great training weapon. You can shoot at 10¢/round with a 22lr, or you can shoot at 50¢ a round for 380 or 9mm. And, because a 22lr is so easy to shoot, you can run through 50 to 100 round like it was nothing. It would not be uncommon for a few friends to get together for a day of casual shooting and easily run through a Brick of 500rds. Quality Bulk Ammo can run about 7.5¢/rd (Federal Auto-Match).

Are you looking for a Rifle or a Pistol?

If you are looking for an alternate to your EDC (every day carry), then try to get a Pistol that is as close to the EDC as possible, and it becomes a low cost training pistol.

If you want a generally good Pistol to shoot, and a generally fair price, consider the Ruger Mark IV in either Tactical or LITE. Highly regarded, though not a light Pistol, it is very well balanced and easy to shoot.

https://ruger.com/products/markIV/overview.html

https://ruger.com/products/markIVTactical/models.html

https://ruger.com/products/markIV2245Tactical/models.html

https://ruger.com/products/markIV2245Lite/models.html

Obviously, because of the Size and Weight, these are less than ideal for Carry, unless it is Open Carry, but great for training and just fun accurate shooting.

There are Similar Heavy Pistol from S&W Victory and Browning Buckmark.

In lighter closer to Carry-Type Pistols - Taurus TX22, S&W 22 Compact, Sig P322, and many others in 22lr caliber. These generally weigh in the area of One Pound.

If you are looking for a Rifle, and you want a Semi-Auto, then the Ruger 1022 is the top consideration.

https://ruger.com/products/1022/overview.html

There are about 66 Models of Ruger 1022 ranging from under $300 up to nearly $1,000, so you have a lot to choose from.

There is a tremendous Aftermarket Support for the 1022. Once you have one you can build it into any type of Rifle you want. And for about $850 and MORE, you can build a Full Custom with 100% aftermarket Parts.

You can go to - r/1022 - to see the range of possibilities from the many variation of the 1022.

If you are looking for a Bolt Action 22lr Rifle, then I would say these in order of Price -

Modest Price -

- Savage Mark-II

- Savage B22

- Ruger American Rimfire

Mid Priced -

- Bergara BMR in Steel or Carbon Fiber Barrel

- CZ 457

- TIKKA T1X

In Mid Priced, CZ-457 is highly regarded for quality and accuracy -

https://cz-usa.com/product-category/rifles/rimfire/

Variation of the Varmint and Varmint Pro seem to be favorites.

A vast Majority of the above are UNDER $1,000. Most of the Mid-Prices are in the roughly $550 to $750 range. If you can spend $1,000 or more, there are some othe nice considerations.

Like I said - 22lr are Fun, Economical, and Easy To Shoot.

Also, excellent for Training Young and New Shooters. Very Low Stress and not intimidating to New Shooters.

I think I can safely say, and that others would agree, that - everyone should have one or more 22lr.


r/22lr • • Jun 26 '18

When you want a nice 22 but also hate Ruger for helping to write the "Assault Weapon" definitions

Post image
1 Upvotes

r/22lr • • Nov 28 '24

Anyone ever had a “bad experience “ shooting 22lr through a 22mag revolver??

Post image
0 Upvotes

I’m pondering these rock island imported, Alfa proj Czech made 22 DA revolvers but the price is very “volatile “ (on the 9 shot, 22lr versions). The 22mag 8 shot are less , and i figured I could just shoot the 22lr through it, but everything I’ve ever read says not to Do it. So my question is has anyone actually had a first hand account of a negative situation arising from that practice??

Thanks!!


r/22lr • • Mar 31 '26

Love this a year later, gave it a barrel upgrade.

Thumbnail
gallery
1 Upvotes

Heritage Rough Rider 4.75. 3D barrel print from booligan shooting sports. Added an olight baldr S and I'm pitching a tent.


r/22lr • • Jul 10 '24

The sky is blue. Also, if you modify the bolt lock on a Ruger 10/22 so that you can release it with one hand, it will slam forward just like it does every time you fire a round. So please know that there is nothing to see here.

1 Upvotes

Edit: The sky appears blue. Also, if you modify the bolt lock on a Ruger 10/22 so that you can release it with one hand, it will slam forward just like it does every time you fire a round. So please know that there is nothing to see here.

The


r/22lr • • Nov 05 '24

Do I have to send this in to Ruger? Backpacker rifle

3 Upvotes

Had a feed issue since purchase. Shaves ever single round that goes in the chamber


r/22lr • • May 09 '25

Looks like an impact

0 Upvotes

Last one for this month I swear, lol. I just wanted to post to show that I belive this is what an impact looks an sounds like, if it is an impact and if you had a super shaky spotter scope.

Another 600 yards and the camera shook during what looks like an impact on the top right of the head, I feel like you can hear a super faint impact sound around 7ish seconds?


r/22lr • • May 28 '25

Is this safe or should I full send?

Thumbnail
gallery
14 Upvotes

Found one of these in a box of 500 of thunderbolts.


r/22lr • • Apr 02 '26

Your favorite Coated/Plated subsonic ammo.

Thumbnail
gallery
0 Upvotes

let me preface this with that I love CCI SV and it works great in all of my guns but I am getting tired of cleaning and picking off all the lead build up in my Silencer Co Sparrow and looking for a cleaner alternative. I know CCI has there own line but looking to see what you guys like before I buy some sampler packs and see what groups and functions well in my guns.

Pics for attention. CP-33, 10/22 and Savage MkII.


r/22lr • • Jan 14 '24

Here is my funny gun that I didn't buy.

Post image
0 Upvotes

I found this picture on the internet because I can't afford guns so I'm pretending it's mine.

I googled "Anschutz 1727 F with funny sticker and feet" this was the first hit, enjoy.


r/22lr • • Dec 28 '23

Hearing Damage

0 Upvotes

🤦‍♂️ such an amateur mistake. I’m rather new to .22 cartridges, was shooting 10 grain .22 and 40 something grain. The bullets were the same size but one was plated the other was pure lead. For whatever reason my brain said grain= amount of powder. Sighs. So I load up my final round of six, and I used a new cartridge, 32 grains copper plated hollow. So here’s the mess up the brain goes 32 is lower than 40 maybe it’ll be loud but meh. For context when I shoot the 10 grains I don’t use hearing aid they are super low in loudness. So I put two in the round of six. How much louder can it be right? Well…. It was louder than the 40 grain cart. Felt like I had an instant concussion and my ears. felt immediately sore. Right now no ringing in my ears they are manageably sore. I just shot once that round. And packed it up. So you experts, experience filled shooters. Should I be worried? Or take this as a lesson and ALWAYS wear protection. I hope I didn’t mess up my hearing permanently ……damn


r/22lr • • Jun 15 '26

Rate my gun

Post image
0 Upvotes

Marlin model 795, i've had it for a few years now

2-7x20 scope, QR adapted sling mounts


r/22lr • • Oct 24 '25

22 revolver trouble

0 Upvotes

I have an h Schmidt Texas scout which is a copy of a heritage rough Rider I picked up for 50 bucks it's gotten some work done but the latest and big problem is the hammer slipping I suspect I need to replace it but I would like to hear a second opinion


r/22lr • • Oct 03 '26

Eley Club Lot 3124/40012

Thumbnail
gallery
0 Upvotes

I wanted to share my latest accuracy testing results using Eley Club .22 LR ammunition ($66.48 = 500 + shipping or local $10.99) 

Overall, the Howa M1100 18" Barrel experienced no misfires or jams, and it fed smoothly throughout the session. Toward the end, I noticed the magazine needed cleaning, which makes sense given the coating on this brand:

  - Eley = Waxy

  - SK = Oily

  - Fiocchi = Dry

Preparation:

To prepare for testing, I run a dry cloth through the barrel twice to clear out residue, followed by 10 test rounds to season the barrel for the Eley ammo.

Results:

I shot three 3-shot groups suppressed at 50 yards using 3/8" red dots as my point of aim:

I'm continuing to test to see which brand and Lot# gives me the tightest groups overall.


r/22lr • • Nov 15 '24

Hey heritage owners if you would like you can check out my group for only heritage firearms it is called r/heritegerevolvers

Post image
0 Upvotes

r/22lr • • Feb 11 '23

SHTF Ammo storage

1 Upvotes

Hey all. Been looking into how to store/carry large amounts of .22lr, just in case shit hits the fan one day.

I decided on Gatorade bottles for “most” of my (bulk) type .22lr; however I also like the idea of having Match grade ammo as well, for those 300+ yard shots if necessary for whatever reason…

How would you guys go about storing that ammo? I don’t want to keep them in a bottle, as that might damage them. Don’t want to put them in a CCI box, as it will rattle around and might give away my position (unless maybe we stuff some cotton underneath them, perhaps?)

What are your guys thoughts? :)


r/22lr • • May 03 '26

Savage mark II fv-sr is trash

2 Upvotes

This gun sucks ass. Picked up the gun today and went to the range. Shot about 30rds fine. Eventually, I had a failure to extract the spent case literally every single time. Had to remove the mag and pry the spent case out with my knife. I tried taking the bolt out and cleaning under the extractor to make sure it wasn’t clogged. Still failure to extract from the chamber after every single shot. I’ve never wanted to sell any of my guns before now.

I’ve read this is a common issue with this gun and Savage doesn’t care to fix the issue even years later.


r/22lr • • Dec 05 '25

Little FRT tx22 fun

2 Upvotes

r/22lr • • Jun 25 '26

Cyclops Joe Rhea rifle scope reviews

0 Upvotes

How many of you guys watch Joe's reviews on YouTube? Did you know his channel was hacked and taken down by YouTube. Joe has tried to get it back but it appears that YouTube is not going to restore it. X.com is the only place that YouTube can be contacted for help. Please post to @ YouTube to restore Cyclops Joe Rhea's channel. Do it daily and share.


r/22lr • • Nov 14 '25

Need help analyzing a forensic test result on a .22 nail gun blank used in a non-functional aluminum model

Post image
0 Upvotes

Hi everyone, I’d like to ask for some technical insight.
This is not about legality — I just want to understand the physics, because something in a forensic test report seems mechanically impossible.

I built an aluminum model that cannot normally fire anything.
Below is a cross-section diagram of the structure:

(Insert your image here)

Key points of the structure:

  • The “barrel” is just a 6061 aluminum tube, ID 6 mm, smooth bore, no rifling.

  • The muzzle end has a 3 mm contraction hole, which prevents any real .22 LR from being chambered or fired.

  • A .22 LR projectile (diameter 5.72 mm) can only be inserted from the front as a loose piece, with no fixation.

  • The firing pin and hammer are aluminum alloy, with a completely flat striking face (not a needle point).

  • When I tested it myself, .22 nail gun blanks (powder loads) could not reliably ignite. Even when one ignited, it took multiple misfires, and the primer usually showed two separate light firing pin marks.

However, the forensic lab claimed:

  • Projectile mass: 2.58 g

  • Diameter: 5.72 mm

  • Measured velocity: 367.2 m/s

  • “Specific energy”: 682.01 J/cm²

My questions:

  1. With a smooth 6 mm tube, no chamber seal, and a projectile that is just loosely sitting inside, is it even possible to get a 2.58 g bullet to 367 m/s?

  2. Wouldn’t the huge gas leakage cause extremely low pressure and velocity?

  3. Can an aluminum flat-faced hammer + aluminum firing pin even reliably ignite .22 nail gun blanks?

  4. How would multiple light primer strikes affect pressure and ignition?

  5. Does this structure look capable of producing the ballistic values they reported?

I’m hoping people with experience in .22 LR, blank cartridges, internal ballistics, or DIY test rigs can give me some technical opinions.

Thanks!


r/22lr • • Nov 19 '24

Where am i supposed to buy cz 457 magazines

0 Upvotes

title