r/Drugs • • May 26 '14

Modifying ecigs to vape DMT and other drugs. NSFW

Has anyone ever done this? It's possible to buy rechargeable and disposable ecigs in the uk for £1. I obviously couldn't resist just tearing one apart but then I started having ideas.

I like vaping; I've vaped DMT, 2C-E, 2C-B and DOC in the past and it's an excellent ROA which gives excellent intensity control and instant comeups. Unfortunately nothing is quite as slick, cheap and discreet as an ecig and the technology is clearly getting extremely cheap.

Nicotine vaporises at 247*C so anything under that is fair game. I have here some propylene glycol and I am wondering the best way to do this on a budget so that I could have 4-5 to pass around at parties. So far my problem is that they are hard to dismantle without destroying the delicate mechanism, and they have to be dismantled to get the nicotine out.

So, has anyone done this, do they have any resources on hacking "cig-a-likes" and can you offer any pointers for me?

152 Upvotes

127 comments sorted by

6

u/cars_are_real May 26 '14

Hacking the cig-a-likes is somewhat difficult, due to the fact that the pre-loaded fluid is stored in cotton, so you can't just pour it out and replace it. I'd suggest finding really cheap refillable cartomizers with a 510 connection and getting a handful of 510 batteries.

That's just a quick google search, you can probably find cheaper batteries.

There seem to be some video tutorials for hacking convenience store e-cigs

5

u/Borax May 26 '14

Cheers for the only answer which really addressed ultra low cost vapes!

/u/changetip 0.5 mBTC

3

u/changetip May 26 '14 edited May 27 '14

The bitcoin tip for 0.5 mBTC ($ 0.29) has been collected by cars_are_real.

What's this?

3

u/cars_are_real May 27 '14

Not a problem. I used to frequent vape forums when I thought I could quit cigarettes. /r/electronic_cigarette is great, although they tend to be weird about questions involving anything other than nicotine.

3

u/Borax May 26 '14 edited May 26 '14

This is the sort of thing I have now and is exactly what I want to mod. As I say, they are £1 each in the pound store here.

I removed the nicotine junk with acetone and then resoaked the synthetic wool with propylene glycol - I broke one learning about the insides and managed to do it to the other intact.

I will look into those bits.

3

u/cars_are_real May 26 '14

Just a word of advice on the acetone, make sure you let the acetone soaked cotton breathe until all of it is gone. Don't want that shit in your mix.

2

u/Borax May 26 '14

Cheers, I'm well aware of the unpleasantness of it, I dried it with a hairdryer before resoaking.

3

u/[deleted] May 26 '14

why would you use acetone to get the nicotine out. that just seems like a hassle, just buy the liquid without nicotine, acetone is dangerous

2

u/Borax May 26 '14

Poundland exploits an economy of scale. They have a limited range but it's all as cheap as chips

3

u/Borax May 26 '14

Can anyone recommend an off-the shelf solution for a personal one which I would not give away? I don't think I am up to building from scratch.

It would ideally have multiple liquid tanks and be inexpensive.

7

u/voiceless_electric_a May 26 '14

Take a look at fast tech shipping is slow but you won't have to tear anything apart I'd get a nemesis clone or Stingray clone a decent battery and a rebuildable atomizer like a omega or a tobh. Then you can adjust the resistance to control your heat. But in a warning please do your math using ohms law when building a coil and choosing a battery your safest route would be to get a Sony vtc5 it has a 30 amp rating which the coil you built couldn't be lower than .14 ohms.

4

u/Borax May 26 '14

I might get just one refillable one for myself but ideally these should be cheap enough to literally give away and unfortunately $17 for the cheapest thing on fast tech is outside of that.

I am interested in what you're saying though, I don't know what "a nemesis clone or Stingray clone a decent battery and a rebuildable atomizer like a omega or a tobh" look like though, any pointers?

3

u/voiceless_electric_a May 26 '14

OK here we go Nemesis http://www.fasttech.com/search?Nemesis%20 Stingray http://www.fasttech.com/search?Stingray%20 Omega http://www.fasttech.com/products/0/10007252/1715200-omega-style-rebuildable-dripping-atomizer Tobh

http://www.fasttech.com/search?Tobh Battery http://rtdvapor.com/index.php/sony-us18650vtc4.html Wire to build coil http://rtdvapor.com/index.php/50-ft-kanthal-a-1-28.html Charger http://rtdvapor.com/index.php/battery-chargers.html You said you were in the UK I believe so these sites may be a little difficult to order from I honestly don't know But please if you do this don't skimp on batteries. If you have any questions just let me know

2

u/Borax May 26 '14 edited May 26 '14

Why can the battery not be skimped on?

Thanks for your help on this, I didn't realise it was as simple as searching [x] style!

OK here we go

You said you were in the UK I believe so these sites may be a little difficult to order from I honestly don't know But please if you do this don't skimp on batteries. If you have any questions just let me know

3

u/voiceless_electric_a May 26 '14

The coil you build is going to pull so many amps from through the battery the same as the cheap ones but if you start pulling to much current the battery will fault and could blow up its really your protection it the whole setup. Most batteries are 10 amp rating so if you stay above .5 ohms you will be fine but the discharge is a higher rate in the lower amp batteries

0

u/[deleted] May 26 '14

[deleted]

1

u/pantherspwn May 26 '14

Wait- the battery just explodes? I've made a few "cloud chasing" builds well under .3 ohms that run just fine, without explosions. And that's running on a 35amp battery. You sure the clone doesn't have a short somewhere or anything?

2

u/voiceless_electric_a May 26 '14

.3 ohms at 4.2 volts you're only pulling 14 amps your fine technically with a 35 amp you could take it down to .14 ohms safely.

0

u/[deleted] May 26 '14

[deleted]

1

u/Borax May 31 '14 edited May 31 '14
  1. What makes you recommend mechanical ones?

  2. I like the nemesis steel one, does it have a button?

  3. What makes you suggest a dripping atty? A clearomizer seems like what i would like but i appreciate a dripper would be better for initial experimentation?

  4. Isn't a rebuildable atomiser a bit overcomplex for a beginner? Why not just use a cheap drip tip?

1

u/voiceless_electric_a May 31 '14

I'm on my mobile so I will try to remember the questions but I believe 1 and 4 can be answered in the same I suggest mechanical because it's easier and no wattage regulation versus a vv or vw will be way higher price. You could get a normal attimozer be you're limited on your ohms there and building a coil is very simple Also the op was wanting to try different drugs witch a rebuildable atomizer you can pick different watts to vaporizer the drug

1

u/Borax Jun 02 '14

I gave 2C-B a go with my mcig and it worked so the system works! Therefore I would like to get a clearomizer for the ease of use, can you recommend one?

What do you think about the VAMO V5?

1

u/voiceless_electric_a Jun 02 '14

I'll have to take a look

2

u/SoberDreams May 26 '14

The stingray mech is a beast. I have an original phantom brass one as well as the Infinite clone, and they both hit like fucking freight trains. I can barely tell the difference when vaping on both, the original hits just a tad harder

1

u/voiceless_electric_a May 26 '14

Yeah I have the Phantom brass also and a nemesis copper clone love them both

2

u/SoberDreams May 26 '14

I have a Nemesis copper clone, I think mine is a Tobeco, not too happy about the threading but I just love the look of the copper finish

2

u/[deleted] May 26 '14

Yes but anything sub-ohm is going to destroy the DMT, thats too much power. I looked into this a few weeks back, and there's no reason not to get an ego twist + evod for this application.

1

u/voiceless_electric_a May 26 '14

True but I thought op was wanting to try different drugs witch a custom setup would give a better result

1

u/[deleted] May 26 '14

Yes, but evod/protank heads are rebuildable, and I'm pretty sure that would give you enough wiggle room to find the optimal "heat settings" for whatever you'd want to try.

1

u/UrShiningDesire May 27 '14

Exactly. People here are telling OP about how he needs to get a mech and rebuildable atomizer and build a coil himself to do this. All OP would need to do is mix whatever drug it is in to the propylene glycol, then just drop some into a $5 evod tank.

2

u/[deleted] May 27 '14

Well, the only problem with saying "oh I'll mix it, and then fill a tank" is that there's a chance of re-crystallization, which would fuck everything, or at least require a full cleaning.

But of course that would only happen if you hit the saturation point of say PG while heated, which would precipitate some of the drug on cooling.

2

u/[deleted] May 26 '14

how about weed? any info about that?

1

u/Borax May 26 '14

You would probably want an mcigTM for that.

1

u/[deleted] May 27 '14

any feedback? worth buying?

2

u/Borax May 27 '14

I have a V1, it is prone to burning the weed but otherwise I am very happy with it as a product. I am awaiting delivery of some V2s to give to friends.

2

u/globaldu May 26 '14

I've only tried this once so far. I've been meaning to experiment further but the gear ain't cheap and I prefer changa, so my FB supplies are limited (I don't make the gear myself - I have neither the time nor space).

I mixed 0.5g of FB DMT with 10ml of Lime flavour, 100% PG, 0% nicotine juice and steeped overnight as it takes a good few hours to fully dissolve.

I filled a Kanger Protank with it and vaped it on a Vamo mod.

It works, but the throat hit and the flavour was very unpleasant. So much so that I had "vaper's tongue" for two days following and there was little I could vape that didn't taste fucking awful. It put me off PG for a month or two.

I still have the juice in my collection. I should just throw it away but haven't. I've tried giving it away but nobody wants it after I explain how thoroughly fucking horrible it was.

I think, next time, I'll just mix up either 50/50 PG/VG unflavoured or even 100% VG. If it clogs the coil then fuck it, but the PG was just too unpleasant.

If you're going to try it I suggest using a more concentrated mix - perhaps 1G/10ml - and splitting it into 4 mixes of 0.25g/2.5ml each to find your sweet spot.

1

u/Borax May 26 '14

Interesting, thanks. I am actually most interested in 2C-B due to the duration but I will bear this in mind.

1

u/matroska_files May 30 '14 edited May 31 '14

Would there be any issues with vaping DMT eliquid in one of the cheap bottom-coil Kanger cartomizers?

70

u/isawgirlganesha May 26 '14

Buy a midgrade non disposable ecig like a vapage uturn or something. Then, buy some atomizers and some tanks and fill each different tank with the desired substance. Clearly mark the tanks and make sure to not mix up the atomizers. Nothing would be worse than going for some nicotine and getting some DMT haha

56

u/[deleted] May 26 '14

Play "vape roulette". Everyone passing around the nicotine at a party and one in 6 gets the DMT. You could maybe flavor it somehow so they wouldn't know until it hits them... sort of like salvia roulette.

12

u/LastOfTheCamSoreys May 27 '14

Twist: they're all dmt

17

u/[deleted] May 26 '14

Fuck that sounds hilarious. I haven't done DMT yet so I wouldn't be able to say how good of an idea that is though.

18

u/ebolaRETURNS May 26 '14

I'm pretty sure that I'd rather watch a recording of this than participate therein. :P

30

u/Iscarielle May 26 '14

It'd be fun for people who have already used DMT.

5

u/DerpThang May 27 '14

And then everyone smokes after. DMT FOR EVERYBODY!

1

u/[deleted] May 26 '14

I feel like once I do it maybe 2-3 times I'd be down to do this.

-11

u/[deleted] May 26 '14 edited May 26 '14

it's probably better for you than nicotine. probably not dangerous unless you have a preexisting heart problem or something, so it would just be heavy mindfuck Obviously, a dmt breakthrough would be more than a "mindfuck" but what i mean is that first of all-- you aren't going to be pulling hard if you're smoking ecigs, and you probably won't have a breakthrough. also, standard doses of dmt aren't known to be dangerous if you don't have blood pressure problems or preexisting heart problems...

2

u/rcxquake May 26 '14

If you find a way to cover up the burn in DMT such that the person doesn't know, please share. As it is, it's hard enough to hold it in without coughing it's so harsh...

4

u/etoiledevol May 27 '14

I'm guessing that once you cough, it's already too late.

0

u/plurpanda May 26 '14

not harsh at all compared to 36 mg fluid with high PG in it

0

u/[deleted] May 27 '14

In vapor pens, the dmt rarely burns unless you hold the button for too long before you start inhaling. Adding a 15-20% flavor concentrate of stronger flavors like clove and spearmint do an alright job. Someone who smokes dmt from time to time would be able to tell by taste, probably not by smell though.

1

u/tacooftwister22 May 26 '14

That is such an awesome idea

8

u/Nutsnbolts12345 May 26 '14

Oh man. I can see so much potential in vaping DMT with an ecig.

5

u/[deleted] May 26 '14

Make sure to use food-grade propylene glycol.

1

u/Pantek51 May 26 '14

Vaporizing 2c-b? I thought it didn't work! How did you do it?

1

u/Borax May 26 '14 edited May 26 '14

It can be done easily in a bulb vape with no further tools but certainly works best when basified first.

1

u/Pantek51 May 26 '14

Any tip to basify it? Could you do like coke with bicarbonate sodium? What about the dosage? Sorry for all those questions but I'd love to try that

3

u/Borax May 26 '14

I used NaOH in ethanol, I'd say that's probably the best as it's strong and nonvolatile. I just put 15mg in the vape and basified there. Because the onset is so rapid you can tune the dose to your desires.

Thinking back though, I would not recommend it because you peak instantly and the duration is so short that you instantly want more so you just vape for ages because the high level of control you have allows you to push intensity you would normally not. I would say that you need a drug with a duration of at least 8h orally for this to really be viable, unless you are using it to boost another drug.

1

u/[deleted] Oct 21 '14

Hi, I'm late to the party but just got linked to this thread. I've never "basified" anything before, and am interested in the process of doing so with 2-CB.

What ratio of NaOH to ethanol do you use, and how many hits do you get out of 15mg vaped? How strong is it compared to oral ingestion? I'd just like to figure out what I need to do to get say, 10mg oral effects per hit so I can have 1 to supplement something like MDMA or LSD, or take 3 to have a short trip.

Is there less of a comedown effect with vaping?

I'm very new to this and don't want to mess up, haha. I literally just mix the NaOH, ethanol, and 2cb in the pipe/vape and go for it?

1

u/Borax Oct 21 '14
  1. As high a ratio as you like. 50mg/ml should be plenty.

  2. Shitloads of hits, depending on how big your hits are.

  3. Depends on the dose. You can easily take it to the level of 40mg oral

  4. 2C-B has a comedown?

You can't get 10mg oral equiv quite into one hit I don't think, but you can get close.

1

u/Ayeleex Oct 22 '14

Vaping the NaOH doesn't pose any problems?

1

u/Borax Oct 22 '14

It's entirely non-volatile

1

u/[deleted] Oct 22 '14

Doesn't have a harsh comedown compared to most things, but I do experience stimulant comedown effects in my body at the end of a trip (restlessness, body anxiety, inability to sleep, body aches), and if I smoked weed during/after the trip I often feel ultra-exhausted, slow, unable to think straight. I rarely have a next-day hangover but it's happened.

Thanks for the response!

1

u/Pantek51 May 26 '14

Thanks a lot :) I see what you're saying about duration/compulsory redose I was just expecting to do this on MDMA/redosing 2c-b so I'm definitely up for trying this one day! Thanks :)

1

u/[deleted] May 26 '14

I'll be that guy, i guess; What's basifying? Is it making it into a freebase?

4

u/Borax May 26 '14

Yes, making it into a freebase :)

4

u/[deleted] May 26 '14

[removed] — view removed comment

1

u/Sluisifer May 27 '14

If you're e.g. extracting DMT via an acid/base extraction, then your precipitate from the organic phase is a base. It's a 'free base', hence the term.

Basification can be accomplished quite easily by using a suitable solvent and base, e.g. ethanol and sodium hydroxide.

1

u/emspfaery May 26 '14

I have one called Vapin plus. the chamber screws off to add the nicotine liquid;)

2

u/Borax May 26 '14

That looks ok, $25 for all the kit I would need, is it any good?

Still 10x my target price though

2

u/emspfaery May 26 '14

I have only used it for the nicotine. I will be two weeks smoke free on Thursday and i am not pulling my hair out...so pretty good ;)

1

u/Siik_Drugs May 26 '14

The vapin plus don't have voltage adjustability. Honestly I think the voltage adjustable ones would be the best despite the price. I had a visions spinner battery that had volt change and was able to connect to a dry herb and wax atomizer. 50$ but came with a case the essentials and a mix tube

1

u/2005cadillac_ctsv May 26 '14

Can I put coke in my iclear or kangertech with an itaste mvp battery? What would the effects be like as ive only ever sniffed the stuff?

2

u/Borax May 26 '14

You would need to freebase it. The effects would be like crack

1

u/schizophrenictornado May 26 '14

Hahaha classy crackhead

1

u/2005cadillac_ctsv May 27 '14

Thanks, fuck that shit than lol

1

u/[deleted] May 26 '14

I actually just got done doing this with my non disposable e-cig, but I made a weed tincture, I used glycerin and ground up weed, soaked it for 2 weeks, shook it up daily and strained the oil out, and then just added it right to the atomizer

1

u/Borax May 26 '14

Have you tried it yet?

1

u/Nullkid May 27 '14

I've been wondering how well mixxing concentrates with eliquid would fare..

1

u/Dick_In_Yo_Mouth May 26 '14

What about MXE? can you put 80mg in a 1.5-2ml tank, and puff on it all day for that mxe love?

1

u/Borax May 26 '14

I will certainly try MXE but its solubility in PG does not seem great

1

u/iwh678 Oct 14 '14

I know this thread is fairly old, but can you explain how you vaped DOC? Did you have yo convert it to freebase first? I'm trying to figure out a way to use my DOM in an e-cig.

1

u/Borax Oct 14 '14

It didn't need any treatment, vaped fine as the HCl

1

u/p5ych0naut May 26 '14

Wha? I was under the impression that some of those chemicals don't vaporize at standard air pressure; that they immediately combust. Did you actually get the effects of 2C-E, 2C-B, and DOC from vaporizing??

3

u/Borax May 26 '14

Yes, of the 5 strongest psychedelic experiences I have had in my life I would say 3 have been by vaping.

1

u/legalize-drugs May 27 '14

Interesting stuff. I love the e-cig DMT idea, because people are always for an easy way to consumer DMT.

2

u/[deleted] May 26 '14

the boiling point of dmt is above nicotine--it's 332.1 degrees C

2

u/throwawayfromyesterd Aug 14 '14

I've had a good experiences dissolving my n,n DMT in ethanol (Everclear 75% or 90% work well) and using a Kanger Aerotank (it seems to leak less than the ProTank) with an Ego-C Twist pen set to ~3.7v. 1g DMT stirred into 2mL ethanol. You could probably achieve higher solubility, but in my experience it's not necessary. 2-3 hits handed me a hefty incapacitation and quite the journey. Bonus is that ethanol doesn't clog up the vape like PEG-400/other solvents, and it's easy to squirt a bit more in at a later date to deal with evaporation/recrystallization.

1

u/StephenSchleis Sep 13 '14

everclear like alcohol from a liquor store?? Wouldn't that blow up because of alcohols flammability?

1

u/Allah_Shakur May 26 '14

hehe I like the idea of casually vaping DMT everywhere in public.

3

u/[deleted] May 26 '14

Except once you take that hit you immediately either freeze or fall on the ground.

4

u/Allah_Shakur May 27 '14

casually, still.

1

u/ebolaRETURNS May 26 '14

This is a particularly good idea for DMT, as you wouldn't have to worry about dropping the pipe. Most reports of vaporized 2cs I've seen have been unfavorable.

1

u/[deleted] May 26 '14

Yeah I don't feel a high at all but I believe its just because I used about a gram and a half, and that it'd work if it was stronger

1

u/pyrodoxic May 27 '14

If I could find some Dimitry I'd vape it in a heart beat.

1

u/Frehaz May 27 '14

How did you go about vaping 2c-e?

1

u/[deleted] May 27 '14

I like way you think man.

1

u/karuna19 May 27 '14

I have used a micro g pen to smoke weed. It's made for weed concentrates so you don't have to modify the dmt, just scoop some in there like you would with hash. It works great

You can get kits with 2 pens on eBay for ~$30.

1

u/spidmunk May 27 '14

I don't know how my friend managed to do this, but she tried to modify and ecig to vape DMT, and ended up burning the inside of her lungs.

1

u/ChefBonerFart Aug 02 '14

Yeah I've done it, I could take some pics and do a little demo. I don't jade experience with the dmt but I do know how to hack an e cig. I used a refill cartridge for a blue style cartomizer. My project involved a water soluble tincture, reduced (to increase concentration), then dripped into the fiber inside cartridge. It worked ok, but I imagine the propylene glycol would've been a better carrier. I'm gonna go make a throw away acct, then I'll get into more detail..

1

u/zig-zag420 May 26 '14

Yeah check out fast tech they will have all the stuff you need. learn how to build a custom coil to put whatever substance on this might just be crazy enough to potato. since ive already got all the material minus the dmt i will try it out as well once i can find some

0

u/[deleted] May 26 '14

[deleted]

2

u/Iscarielle May 26 '14

If you could provide a more detailed guide, I'd be grateful. Especially since I'm a novice when it comes to e-cigarettes and vaporizers. And DMT haha.

7

u/[deleted] May 26 '14

I'm going to post a guide as a reply to my original comment once I have a second to type it out.

9

u/Borax May 26 '14

Post as a separate thread, let's get inspiring people

2

u/[deleted] May 27 '14

I'll make a separate thread and post the like to it in here.

2

u/Raisinbrannan May 26 '14

Well he's using a protank 2 (with airflow control), and those use ego (or 510) batteries. You can use an ego-c twist battery to get higher voltage (it's variable voltage so it allows for hotter/bigger hits). Then just mix PG (propelyne glycol) with dmt and load it into the protank. Probably costs $25-30 for the setup.

I've never used it for that but that's what I think he's saying.

2

u/legalize-drugs May 27 '14

The key to consuming DMT is to somehow vaporize it. Then you want to take HUGE hits and hold them for about ten seconds. try to take three hits, if possible. Do it in a quiet, safe place, not a party, with a clear head (not drunk). That's your short DMT guide.

1

u/Iscarielle May 27 '14

I've used it before, but I'm not really sure what temp it vaporizes at, or what process to use to dissolve it in the propylene glycol.

10

u/[deleted] May 27 '14

Borax asked me to make a new thread for the guide.

and here it is!!

4

u/Hindu_Wardrobe May 26 '14

So did you literally just mix DMT powder in with propylene glycol and presto, DMT in your ecig?

I literally quit nicotine yesterday, and I have all of this vape gear that I don't want to not use anymore (since I'm sure vaping 0mg nicotine juice will get old eventually), so I am very very interested in this.

19

u/[deleted] May 26 '14

Yes, its a little more complicated because of a few things in preparation but you could definitely get away with just using PG as the base solvent.

I'm going to post a guide as a reply to this comment once I have a second to type it out.

3

u/the-tripper May 26 '14

I'd also be interested in your guide :) I don't have an e-cig but I'd totally buy one just for DMT use

2

u/cyrilio I Drugs May 26 '14

Hope I don't forget to check in here, because this seems like something I could do.

2

u/[deleted] May 26 '14

you can save replies on reddit without RES now, just click save under his comment.

1

u/Hindu_Wardrobe May 26 '14

Yes please!!

1

u/JManSenior918 May 26 '14

Have you been able to breakthrough using this method? I have almost no experience with ecigs, but I would imagine you can't take huge draws. Correct me if I'm wrong though.

2

u/[deleted] May 27 '14

Yes, I have successfully broken through a few times when I've meant to. It's all in the technique of taking the hit. One must cook it for only a second and then begin to inhale a large hit, hold it in as deep as possible for a few seconds, then continue with a few more successive hits. After the third or fourth it will become fairly difficult to see but you must trudge on. You'll know when you've reached the point of complete disconnect.

1

u/[deleted] May 26 '14

I just made a weed tincture for my e CIG, the instructions I looked up said I could use glycerin? Why should I "never ever ever" use it?

1

u/[deleted] May 27 '14

You can't get a high percentage without a guaranteed clog in your future. Also, although I don't have a deep enough background into chemistry to say for sure, I don't want to risk a possible reaction between an organic material such as veg glycerin. PG is already effective and very inert.

2

u/bigwaffleman May 27 '14

I have yet to see any studies about vaping PG and that worries me.

1

u/[deleted] May 27 '14

and I'd be right there with you if I were to use it as an actual nicotine/cigarette replacement, but I'm not smoking dmt 3-6 times a day :P

also, we have PG in an interestingly large amount of our food as well as it having a very high LD50 in comparison to how much could possibly be absorbed through inhalation.

I agree with it having a possible toxic effect even in lower doses, but considering I don't use it for anything but DMT, I don't mind the minimal risk of using it a few times every week or two.

1

u/[deleted] May 26 '14

My Next Summer Project!!

0

u/[deleted] May 27 '14

[deleted]

5

u/AutoModerator May 27 '14

Hello, we don't use SWIM or FOAF in /r/drugs as it does not offer legal protection and only makes reading your submission harder.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/[deleted] May 26 '14

[deleted]

3

u/Borax May 26 '14

Yes, in a bulb vape. The effects last about 4-5h to baseline as I recall and the dose is just however much you fancy, vaped slowly so that you can gently get to the level you want. I never got excessive body load from it and this was no different, maybe even less.

1

u/G-pissy May 26 '14

Cool, I think I'm gonna have to try this soon.

0

u/[deleted] May 26 '14

[deleted]

1

u/Borax May 26 '14

Depends on the powder. The 2Cs all have a distinctive taste, I couldn't describe it to you though.

1

u/welcomewilson May 26 '14

Just like if you were hitting it out of a glass meth/DMT pipe.