r/civilengineering • • 22d ago

Welcome to r/civilengineering

6 Upvotes

r/civilengineering • • 11h ago

Arched-Trestle Bridge Table

Thumbnail gallery
306 Upvotes

It was suggested to me that your community might like this.


r/civilengineering • • 12h ago

Disclosing expunged criminal record on the PE application

54 Upvotes

Hi all,

15 years ago, I was convicted of four drug felonies; however, my criminal record has since been expunged. Fast forward to today, and I'm almost ready to apply for my PE license. On the PE application, there's a question asking whether I've ever been convicted of a felony.

I've consulted with an attorney on this matter, and they mentioned that, legally, I can state that I've never been convicted based on Oregon law. I also reached out to the state board regarding my situation, but they wouldn't advise me on how to answer the question.

With that being said, I'm 50/50 on how to answer the question because I feel like if I state "no," it could potentially be viewed as unethical.

TL;DR: I was convicted of four felonies, but my record has since been expunged. Legally, I can say no on the PE application, but ethically, can I?


r/civilengineering • • 6h ago

Is working as a construction materials testing technician / inspector a detriment to my career?

6 Upvotes

Military spouse here - the nearest engineering-related job I could work at near my husband's military installation is Terracon as a engineer technician. I do CMT and construction inspecting in the field, however, we have about another 2 years until we PCS and this is the best I can probably do. Do you think this would be a detriment to my career working 2 years as a CMT and then moving forward to a design or management role? Thank you


r/civilengineering • • 8h ago

Question Aviation

7 Upvotes

Any airport engineers out there? How do you like it? Do you think it’s an easy transition for someone coming from transportation/highways?


r/civilengineering • • 2h ago

Career Career advice for intl CE grads

2 Upvotes

I’m in US, intl student graduating in May 2027 with a master’s in Civil Engineering (water/wastewater focus). I already have my EIT, but haven’t had the opportunity to get internship experience because I’ve been busy with my thesis and research.
I’ve talked to a few seniors who graduated recently, and their experiences have made me curious about how I should prepare for life after graduation.
For those working in civil engineering, especially water/wastewater:
- How important is internship experience compared to research?
- What skills should I focus on before graduating?
For international graduates,
- how challenging has employer sponsorship been?

Would love to hear your honest experiences and advice. Thanks!


r/civilengineering • • 1h ago

PE/FE License Florida PDh laws and rules

1 Upvotes

How are you guys getting the laws and rules pdh course from Florida for license renewal of PE?


r/civilengineering • • 11h ago

How does ESOP work?

6 Upvotes

I see a couple firms have an esop with a 3-year or 5-year vesting period.

Gets prorated each year so 33% a year (for the 3 year example).Fully vested at the end of 3 or 5 years.

How are the shares distributed over the year? At the end of the year, quarterly, bi yearly?

What happens if you leave before the end of the year?

Also is esop the same as RSU’s I hear about at other companies?


r/civilengineering • • 5h ago

Engineering Path

2 Upvotes

Reaching out to any civil or mechanical engineering. I want to know your path from senior year to your first job and how its going for you.


r/civilengineering • • 2h ago

Weekly Civil Engineering Discussion - Careers, PE/FE, Rants & Jobsite Stories

1 Upvotes

Welcome to the weekly r/civilengineering discussion thread.

Use this thread for civil engineering topics that don't necessarily need their own standalone post, including:

  • Career questions and career advice

  • Questions from students, interns, and new engineers

  • PE / FE exam discussion

  • Workplace complaints, frustrations, and rants

  • Jobsite stories and field experiences

  • Questions about different civil engineering disciplines

  • Office vs. field work

  • Consulting, public sector, construction, and industry discussion

  • General civil engineering conversation

A few guidelines

Keep discussion civil and follow all r/civilengineering rules.

If you're asking for career advice, providing some context such as your location, education, experience, discipline, and career goals will help people give you better answers.

For PE/FE questions, include the exam or discipline you're referring to when relevant.

Workplace complaints and rants are welcome, but do not post personally identifying information about coworkers, clients, or private individuals.

Looking for a job or hiring? Please use the current Monthly Civil Engineering Jobs & Hiring Thread instead.

Otherwise, ask away, tell us what's happening at work, share something from the field, or just talk civil engineering.


r/civilengineering • • 2h ago

Career Civil Engineering undergraduate

Thumbnail reddit.com
1 Upvotes

r/civilengineering • • 8h ago

Transmission Line Design

3 Upvotes

Any T design guys out there? How do you like it? Is it fairly easy to pick up on?


r/civilengineering • • 11h ago

Internship advice

5 Upvotes

I’m a junior civil engineering student looking for advice on internships this summer. Last summer I worked for the DOT as a TCI. It wasn’t the worst experience but i definitely want to try something new. I currently have 2 main offers I’m considering.

The first is with DOT in the office. It’s a 5 minute drive from my house and it would primarily be in highway design.

The second is with a Heavy Civil company that would be a field position. It would lean more into the construction management side of things and would be about an hour commute there and back.

My main thing is while I was in the field it was drilled into me that field experience is extremely valuable if I want to consider design. Would it make sense to do one more year in the field before I switch to design or would it make sense to get design experience before I Graduate next summer?

Any advice is welcome.


r/civilengineering • • 5h ago

Career Transition from carpentry to civil/structural engineering

Thumbnail reddit.com
1 Upvotes

r/civilengineering • • 9h ago

Question KHA negotiating on benefits / base

2 Upvotes

How much wiggle room is generally there in senior level roles (PB/ PM/ Senior). Do they go above band on the base ? For Kimley-Horn. Assuming one has a very nich skill set. And why do some jobs have this mentioned (Eligible for lucrative performance based bonus, is this the IPB?), because aren't all positions eligible for performance based bonus? Hence it's not fixed %?

On the P vs B ladder is the IPB same on the same levels meaning P5 P6 vz B5 B6 B7 etc?

Also generally speaking are bonuses, and benefits such as PTO negotiable?

Do they also do Geo Banding viz. If a role is being posted in different offices, are the paay ranges different for the same role depending on say TX vs FL vs Mid west etc?


r/civilengineering • • 1d ago

Video from before Brooklyn building collapse: Worker compares SOE drawings to as-built conditions.

469 Upvotes

r/civilengineering • • 18h ago

[Urgent] How large does a hole in a floor slab have to be to compromise the structural integrity?

Post image
9 Upvotes

Context: I live in Pueblo Libre, Lima, Peru, on the second floor of a 48-year-old, nine-story building with three apartments per floor, a ground floor for access and commercial offices, and an annex on the tenth floor. A sewage pipe has burst in the kitchen of the apartment above mine (third floor). The owner, who is a friend of my landlord, has decided it's easier to repair the pipe from the apartment below rather than breaking through a 10 cm thick solid cement floor that supports the kitchen cabinets. My concern is that this is a seismic zone, and they will still have to break through another 20 cm to finish repairing the pipe. The current dimensions are approximately 23 cm by 15 cm, and the 20 cm opening will be made in the direction of the silver rule, resulting in a 23 x 35 cm opening. Thank you very much and have a good day everyone.


r/civilengineering • • 11h ago

OCS Displays Civil 3D DWG

Thumbnail gallery
2 Upvotes

r/civilengineering • • 1d ago

Worker injured in Brooklyn building collapse alleges corners were cut at construction site: ‘Third-world stuff’

Post image
314 Upvotes

A construction worker who was injured in the fatal Brooklyn building collapse alleges corners were cut at the adjacent job site.

The laborer retained New York City construction accident lawyer Christopher Gorayeb following Wednesday’s collapse that injured the man’s knee, shoulder and back when a wall fell on him.

Gorayeb’s new client was employed by subcontractor Elite Concrete to lay the foundation for the planned mixed-used project at 2625 Bedford Ave. — next door to the three-story apartment building that suddenly collapsed Wednesday, killing eight people.

Excavation work was taking place at the construction site when the facade of 1321 Flatbush Ave. crumbled into the adjacent lot.

The construction worker alleged shoddy measures were taken by the developers, with a 5-foot dirt pile topped with concrete used to prevent a potential collapse of the neighboring three-story apartment building — in lieu of proper wall shoring.

Photos provided by Gorayeb, and excavation plans approved by the city and reviewed by The Post, showed shoring around most of the building, except for a portion of the construction zone that bumped up against 1321 Flatbush.

“That’s like Third World stuff, using dirt to bank against a building and hold it up,” said Gorayeb, who’s been working as a personal injury lawyer for 40 years.

The worker claimed that the reason that portion of the site didn’t use proper shoring was because the owner of 1321 Flatbush didn’t want it, Gorayeb said.

“The owner of the building did not want them to install shoring, similar to what was against the yard in the back of the building, because that would have created holes and potential for leaks into his building,” Gorayeb said.

“This was an entirely preventable accident, as most are,” Gorayeb alleged. “They didn’t take reasonable steps that would have supported the building, and instead they used almost ridiculous procedures, inadequate procedures, that no competent engineer or contractor would have implemented to support an unsupported wall of an adjacent residential building.”

https://nypost.com/2026/11/14/us-news/construction-worker-injured-in-brooklyn-building-collapse-lawyers-up/


r/civilengineering • • 5h ago

How do your projects source temporary power?

0 Upvotes

I'm developing a flex-fuel generator for job sites. How does your company or your projects source generators: buy, rent, lease, or a service? What does a typical unit cost, or what do you pay per week or month?


r/civilengineering • • 9h ago

Career Owner Management Advice

Thumbnail reddit.com
1 Upvotes

r/civilengineering • • 9h ago

Replacing a Large Catch Basin With a Smaller One

1 Upvotes

How much more likely will a road flood if a series of catch basins were replaced with a structure that has only 66% of the volume of the original structure? This is the only change - no roadway grade change.


r/civilengineering • • 13h ago

Uk civil engineering

2 Upvotes

Im an early careers bridge engineer with just over 3 yrs experience working for a consultancy. Can any more experienced engineers share their knowledge on how to get more than the standard lowball raise every year.


r/civilengineering • • 16h ago

Offer Evaluation: Seeking Feedback

3 Upvotes

Location: Irvine , CA (Orange County)

YOE: 5 (Recent PE)

Industry: transportation

Base: 120k (offered 110, countered 130)

Bonus: target 5%

Sign on bonus: 2k

PTO: 160 hours, 9 holidays.

WFH: only one day allowed a week.

Large firm