r/precisionrimfire • • Apr 23 '25

My two precision rimfire guns

Post image
89 Upvotes

Top: CZ 455 “tacticool”, the only things I added were the vortex diamondback tactical 4-16 and the bipod.

Bottom: savage mk-II fs-vr, I ordered the customized Boyd’s stock right after I bought it, 20 MOA base, 6-24 diamondback tactical, and bipod.

Both rifles are impressively accurate, especially at distance. I find the CZ is more accurate with a wide range of ammo, even bulk box, whereas the savage is only as accurate with some ammo.

The CZ will shoot really tight groups at 50 and can make accurate hits out to 300(my max available range) with most bulk box ammunition. The savage with bulk box isn’t capable of shooting tight groups at 50 and at 300 is wildly inconsistent. I’ve found that Eley yellow box runs the absolute best out of my savage and will print one hole groups at 50 and can make impressive first round impacts at 300. With even halfway decent ammo the CZ outshoots the savage consistently which is why I shoot it more often.

For those curious the diamondbacks don’t quite have enough elevation to dial out to 300 without a 20 MOA or greater base. With my savage I have to max out elevation and impacts are still about 4-8 MOA low in my optic whereas on the CZ with max elevation dialed it’s about 12+ MOA low depending on ammo velocity. With supersonic ammunition impacts are around 12 minutes low at max elevation but with subsonics they can be much lower than 18-20. I need to just get the 20 or 30 MOA base for it but I just haven’t done it yet. Call it procrastination lol


r/precisionrimfire • • Jan 18 '23

1022 custom build 🔥🔥🔥

Post image
48 Upvotes

r/precisionrimfire • • Feb 09 '26

Tried my hand at Precision Rimfire for the first time with an RPR 22. Not gonna lie, this shit is addicting.

Post image
45 Upvotes

Picked this rifle up used for a steal recently and threw on the Arken 5-25x50. I have low vision so the high power scope was super helpful. It was so satisfying ringing steel out to 500 yards. Was just running CCI Standard Velocity for now, but the combo was performing surprisingly well.


r/precisionrimfire • • Jun 21 '22

Fly Had it Coming

Post image
37 Upvotes

r/precisionrimfire • • Mar 20 '26

NRL22 / PRS Rimfire Gear

Thumbnail
gallery
34 Upvotes

Shooting my first NRL22 & PRS Rimfire matches next month with a few buddies. Been doing a bunch of research leading up and working on my DOPE. I already had a lot of this gear so I've been trying to keep it on the budget side. Let me know if you have any suggestions or tips going into my first match. Thanks!

Rifle:

- Savage MK II FV

- Athlon Argos BTR Gen 2 6-24x50

- MDT Field Stock

- CsSpec 10rd magazines and speed loader

- Magpul QD MLOK Bipod

- Generic 0 MOA rail (30MOA EGW is in the mail. Ran out of elevation real quick lol)

- Generic rail mounted bubble level

- Random 30mm 1" rings (had them laying around)

Gear:

- Homemade sand bags

- Homemade zippered pouch for ammo

- IFAK

- Vortex Summit SS-P tripod

- Vortex Triumph HD 10x42 with an Arca mount and 3D printed plate

- Old Nalgene

- Mystery Ranch In and Out 19L

- Fjallraven pouch

- Walkers electronic earbuds

- Krydex pistol mag pouch


r/precisionrimfire • • Nov 02 '22

B14R in KRG Whiskey-3

Post image
30 Upvotes

r/precisionrimfire • • Sep 30 '22

Balance Achieved…. Ruger precision rimfire for NRL22

Thumbnail
gallery
29 Upvotes

r/precisionrimfire • • Nov 30 '24

Never good enough. Ammo ammo ammo is always a problem.

Thumbnail
gallery
27 Upvotes

r/precisionrimfire • • Nov 02 '25

First time trying this... Not shabby

Thumbnail
gallery
26 Upvotes

My T1X shooting CCI Standard Velocity. Nothing special ammo or barrel wise. Swirling wind of 5-10 mph all day and I printed this target on standard sized notebook paper so it's smaller than the regulation targets.

T1X is in a KRG BRAVO Chassi, area 419 Arca rail and Burris XTR III 3-18 on top. I use this for squirrels really but I'm enjoying the target side. It's making me want to get a few samples of match ammo.


r/precisionrimfire • • Mar 07 '26

B14 waiting on new can

Post image
25 Upvotes

r/precisionrimfire • • Jun 18 '22

Just joined the precision rimfire game with my 457.

Post image
25 Upvotes

r/precisionrimfire • • Aug 15 '26

Came in 3rd at my first rimfire match!

24 Upvotes

CZ 457, Venom 5-25 ffp mrad, SK Rifle Match. This was a charity match and all proceeds went to WWF. I can't wait to do an NRL22 match now.


r/precisionrimfire • • Dec 11 '21

Banging quarters in the backyard

Post image
24 Upvotes

r/precisionrimfire • • Jul 15 '25

B14R update

Post image
23 Upvotes

Made a few changes since my last post.

  1. Swapped the Vortex DB tac for a Arken EP5 Gen2. Definitely like having the 10 mil rev and some more travel in my reticle. Learning a different reticle has been a curve but not the worse. Shot a local match in June with it and did pretty well

  2. Added a Banish 22k v2 suppressor. Don’t think it’s going to become a permanent feature for matches but it’s been fun to have for plinking around home and varmint control. Just a fun lil thing I picked up a cert for.

  3. Hoz And Shield Control Bridge. These just showed up yesterday and got them mounted up. I’m a big fan of just about everything I’ve gotten from H&S and don’t think this will disappoint either. Will be their maiden voyage this weekend at a local monthly match.

Also pictured is my homemade arca mounted weight I call “BRICK”. It does a pretty good job balancing out this set up until I can get some internal and m-lok external weights.

It feels good to say that a majority of this rig other than the barreled action itself has been put together from prizes won competing in precision rimfire in one way or another.


r/precisionrimfire • • Feb 04 '26

CZ 457 hungry for the SK match rifle

Thumbnail
gallery
22 Upvotes

steel varmints at 100, 150, 200, 225y today. what a joy it is to shoot this gun. 22" barrel

Observed holdovers mil:

50yd 0

100yd 2 mil

150 yd 4 mil

200 yd 6.75 mil

225 8 mil

these are merely observed holdover approximations. up for correction!


r/precisionrimfire • • Dec 31 '24

10/22

Thumbnail
gallery
21 Upvotes

Hey everyone, I picked this up in a trade and had to share a 10 shot group with Norma Tac-22 at 50 yards. I just wanted to get it on paper and I only had 10 rounds of the Norma otherwise I’d have shot more ( I had other 22 ammo with me but I was under time constraints )


r/precisionrimfire • • Feb 10 '26

A couple PRS builds

Post image
20 Upvotes

Made the move to a bolt gun over a year ago but recently saw the Victor Company RPG chassis and decided to throw one on my old Kidd build. Might decided to shoot a few matches this year with the semi auto just to see how it does now that it will balance properly.


r/precisionrimfire • • Aug 16 '25

Decided to set up a precision Rifle.

Post image
20 Upvotes

My first “precision” rimfire so be kind. Christensen Arms Ranger with an Arken SH4J 6-24x50 with a 20 moa rail and Arken Halo ti rings. Has a Dead Air Mask suppressor.


r/precisionrimfire • • Aug 02 '25

T1X in KRG Bravo Chassis

Post image
20 Upvotes

T1X in KRG Bravo chassis. Area 419 scope rail, Arca rail and Atlas BT65 Cal bipod. Anarchy outdoors bolt handle, American Rifle Company M10 rings (my favorite rings by far) Burris XTR III 3.3-18X50 scope with Burris throw lever, mischief machine parallex throw lever and Accuracy first scope level. Shooting standard velocity CCI 40G through the OCL TI22 can it's quiet as a mouse fart and sub moa on calm days. I'm sure it can do better with better ammo but for the cost I love the CCI Standard Velocity. It also cycles my Ruger MK4 perfectly.


r/precisionrimfire • • Jun 25 '25

Current Setup (first post)

Post image
20 Upvotes

Hey everyone, thought I’d show my rig off

Barreled action: Bergara B14R steel Chassis: MDT ACC Premier Gen2 (charcoal green) Trigger: Triggertech Special single stage Optic: Vortex Diamondback Tactical 6-24x50 (MRAD) in warne rings on a 30moa MDT scope rail Extras: Cole Tac cheat sheet holder, Monstrum bubble level and throw lever. *Not pictured: MDT GRND-POD arca mounted bipod, grey-ops mini plate, and a homemade arca mounted weight I call “BRICK”

I just got the chassis in Monday and wanted to show it off with the B14R in it because I just didn’t see many people doing it when I looked around. In the near future the Diamondback is going to get replaced with a Arken EP5 Gen2 and I’m hoping to get at least some internal weights to eliminate the need for my homemade weight and streamline things.


r/precisionrimfire • • Jun 25 '26

Bag fill ideas

Post image
18 Upvotes

Is there anyone trying to mix their own sand fill with success? Looking to practice my sowing and change out my bag’s current bead fill.. was thinking about trying a mix with some kinetic sand but not sure.


r/precisionrimfire • • Mar 06 '26

Gen Five Action Platform (CZ457 Footprint)

18 Upvotes

The DDG Gen Five is an American designed and produced platform based on the physical footprint of the CZ457, so it's a drop-in to factory and aftermarket stocks and chassis systems and accepts factory and aftermarket triggers, magazines and bottom metal.

I'm also nearly finished with my own 457 compatible magazine and bottom metal that will be cross compatible to the factory 457.

The DDG Gen Five is available in two versions, the Standard and Match. The Standard is a single lug lock-up and the Match is a two-lug lock-up, along the lines of the Anschutz 54.

The Receiver is full round, threaded, made from 416SS and uses one of five available MilStd 1913 rails from 0 to 50 MOA. There's also an available 11mm Base Set. The MilStd Rail and 11mm Base Set are secured with four, #8-40 EGW Profile screws and two .125 dowel pins handle shear forces (certainly not from recoil).

The Bolt Assembly features upgraded extraction, improved fire control and the opening and closing cams use timed helices that interface with the helices in the receiver. Of course, the CZ457 is a rock star at feeding/cycling, and that's maintained in the Gen Five platforms.

The Gen Five Standard is a Repeater only and available in RBRP, RBLP, LBLP and LBRP. The Gen Five Match is available as a Repeater and Single Shot and available in the same hand and port configurations.

I have prototyped the Receiver in the early design phase (pictured below) and tested with a factory 457 bolt assembly, and now in the early throes of production, starting with the Gen Five Match. I'm projecting availability to the public within the next five months.

In the attached SolidWorks rendering, the above four actions are the Standard and the lower four are the Match.

The above info answers the questions I've been receiving, but if there are additional questions, feel free to reach out.

Thanks,

MB


r/precisionrimfire • • Feb 06 '26

Insulated rimfire ammo box

Post image
18 Upvotes

Here is how I get better consistency shooting precision Rimfire in cold weather. Ammo stays warm in the house. Put in an electric hand warmer and close it up before heading to range. Take out one mag at a time right before shooting and close the lid. I find it helps improve consistency on those 30°F and colder days by a lot.


r/precisionrimfire • • Jul 21 '25

July 2025 BRSS P.R.O.

Thumbnail
gallery
18 Upvotes

Another month, another fun match. Finished up mid-pack but only 4 impacts out of the podium. Getting closer to the top. The bergara doesn’t seem to mind Norma tac-22 either which is nice.


r/precisionrimfire • • Mar 30 '25

New to PRS and I'm close to done. Few questions

Post image
18 Upvotes

Build Cz457 pro varmint Krg bravo in sako green 419 rail with vortex diamondback 6-24 419 arca rail with 419 clamp and atlas cal bt65

Looking for suggestions on cz 457 trigger upgrades. Stock isn't bad but would like it to be a bit lighter.

Barrels....everyone runs 20-24 inch barrels it seems but how do longer barrels benefit accuracy? Or is it just added fps for longer distance?

Suggest a solid barrel that won't break the bank please.