r/LinuxCrackSupport
•
u/Ujjwal_Gupta_
•
Aug 16 '26
•
4
2
GUIDE [DaVinci Resolve Studio 21.x.x] Bypass Licence Guide Arch Linux
NOTE: Specifically tested for version 21.0.4, but might work for the 21.x.x series.
1. Initial Setup
Download DaVinci_Resolve_Studio_21.x.x_Linux.zip from the Official Blackmagic Website.
Tip: Use the Download Only link at the bottom-left of the registration form to download directly without filling out your details.
2. Dependencies
Ensure you have the base dependencies installed:
sudo pacman -S --needed libxcrypt-compat curl glu base-devel git
Note: Older guides often required manually removing or linking bundled libraries (such as
libglib,libgio, orlibzin/opt/resolve/libs/). With modern updates to the AURdavinci-resolve-studiopackage, manual library fixes are no longer required.
GPU Compute (Required)
Depending on your GPU hardware, install the appropriate OpenCL / CUDA drivers:
- NVIDIA:
sudo pacman -S --needed nvidia nvidia-utils opencl-nvidia cudaUse
nvidia-openifnvidiais not found. - AMD:
sudo pacman -S --needed rocm-opencl-runtime - Intel:
sudo pacman -S --needed intel-compute-runtime
Verify your OpenCL / GPU compute setup:
clinfo | less
3. Installation
Important: Do not run the
.runinstaller directly!
Option 1: Using Git & makepkg (Recommended)
Place the downloaded .zip file in the cloned repository directory before building:
(Assuming the zip file is in ~/Downloads*)*
cd ~/Downloads
git clone https://aur.archlinux.org/davinci-resolve-studio.git
cd davinci-resolve-studio
cp ../DaVinci_Resolve_Studio_21.x.x_Linux.zip .
makepkg -si
(Replace 21.x.x with your downloaded version, e.g., 21.0.4*)*
Cleanup (Optional):
cd ~/Downloads
rm -rf davinci-resolve-studio
Option 2: Using AUR Helpers (paru or yay)
If you prefer using an AUR helper, clone the build files, copy the .zip archive, and install:
With paru:
paru -G davinci-resolve-studio
cp ~/Downloads/DaVinci_Resolve_Studio_21.0.4_Linux.zip ~/.cache/paru/clone/davinci-resolve-studio/
cd ~/.cache/paru/clone/davinci-resolve-studio
paru -Bi .
Cleanup (paru):
rm -rf ~/.cache/paru/clone/davinci-resolve-studio
With yay:
yay -G davinci-resolve-studio
cp ~/Downloads/DaVinci_Resolve_Studio_21.0.4_Linux.zip ~/.cache/yay/davinci-resolve-studio/
cd ~/.cache/yay/davinci-resolve-studio
makepkg -si
Cleanup (yay):
rm -rf ~/.cache/yay/davinci-resolve-studio
4. Crack / Bypass (Version 21.0.4)
Navigate to the DaVinci Resolve installation directory:
cd /opt/resolve
Step 1: Patch the Binaries
Run the following Perl commands to patch the executable:
sudo perl -pi -e 's/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\x74\x11\x48\x8B\x45\xC8\x8B/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\xEB\x11\x48\x8B\x45\xC8\x8B/g' bin/resolve
sudo perl -pi -e 's/\x74\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/\xEB\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/g' bin/resolve
sudo perl -0777 -pi -e 's/(\x40\x84\xED)\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/$1\x75$2/g' bin/resolve
Step 2: Generate the License File
Create the license directory and write the license file:
sudo mkdir -p .license
echo -e "LICENSE blackmagic davinciresolvestudio 999999 permanent uncounted\n hostid=ANY issuer=CGP customer=CGP issued=28-dec-2023\n akey=0000-0000-0000-0000 _ck=00 sig=\"00\"" | sudo tee .license/blackmagic.lic
5. Wayland / Hyprland Fix (Optional)
DaVinci Resolve does not natively support Wayland and must run via XWayland using X11 backends. Without this, it may fail to launch or crash on startup.
Option A: User Desktop Entry (Recommended)
Copy the .desktop file to your local directory so modifications persist across package updates without needing root permissions:
mkdir -p ~/.local/share/applications
cp /usr/share/applications/DaVinciResolve.desktop ~/.local/share/applications/
sed -i 's|^Exec=/opt/resolve/bin/resolve %u|Exec=env QT_QPA_PLATFORM=xcb GDK_BACKEND=x11 /opt/resolve/bin/resolve %u|g' ~/.local/share/applications/DaVinciResolve.desktop
Option B: Modify System Desktop File
Edit the system-wide desktop file directly:
sudo nano /usr/share/applications/DaVinciResolve.desktop
Find the line:
Exec=/opt/resolve/bin/resolve %u
Change it to:
Exec=env QT_QPA_PLATFORM=xcb GDK_BACKEND=x11 /opt/resolve/bin/resolve %u
(Or apply via a one-line sed command:)
sudo sed -i 's|^Exec=/opt/resolve/bin/resolve %u|Exec=env QT_QPA_PLATFORM=xcb GDK_BACKEND=x11 /opt/resolve/bin/resolve %u|g' /usr/share/applications/DaVinciResolve.desktop
Option C: Launch from Terminal
You can also launch directly from your terminal:
env QT_QPA_PLATFORM=xcb GDK_BACKEND=x11 /opt/resolve/bin/resolve
References
7
4
u/Le_Tintouin Aug 16 '26
Beware, if you already have installed Davinci free in the past you will need to remove
/usr/share/icons/hicolor/256x256/apps/blackmagicraw-player.png
and
/usr/share/icons/hicolor/256x256/apps/blackmagicraw-speedtest.png
or it will fail the install.
1
3
u/Sufficient-Spread202 Aug 29 '26
Thank you this works great. But I cant export in h264, is there something I can do for this?
1
u/Ujjwal_Gupta_ Sep 01 '26
The studio version does have its own versions of H264/265 but there does exist an ffmpeg plugin but I haven’t used it.
2
u/Sufficient-Spread202 Sep 01 '26
I have that plugin but I still can't render in h264 or h265, other codecs work just fine
its not really a huge issue though, I just like the small file size of h264 lol1
u/Lalucira Sep 12 '26
I'm having the same problem... so frustrating!
3
u/Sufficient-Spread202 Sep 16 '26
ok dumbass moment
when choosing h264 codec in deliver tab, below it is the option for encoder. You need to select the ffmpeg encoders for it work. I dont know why I didnt try it, I feel so dumb lmao1
u/Lalucira Sep 16 '26
Damn! I didn't even bother to look at that option. I assumed "NVIDIA is NVIDIA" regardless of ffmpeg or not. Thank you so much!
3
u/Electrical-Hyena-402 Aug 30 '26
Does this cracking method work for other distributions, such as Fedora or openSUSE?
1
u/Ujjwal_Gupta_ Sep 01 '26
There is a reference to the original post at the end which has instructions for a fedora based distribution.
3
u/SrinivasImagine Aug 31 '26
Yes. crack is same. but, you don't need to prepare the package. directly install the .run file.
5
4
4
1
3
2
u/Techwolf_Lupindo Aug 16 '26 edited Aug 16 '26
"Step 1: Patch the Binaries"
Ooo...I wonder if this works with sed. I'me looking at patching a binary to take out the date/time kill switch so a later version can be used with legisty flash games. This is for a gentoo ebuild for a package.
Update: Nope. See https://unix.stackexchange.com/questions/346291/editing-binary-streams-containing-x00-bytes
2
u/SillyFalling Oct 09 '26
Still working perfectly on latest version of resolve
2
u/marcoporz Oct 21 '26
what is the version that worked ? 21.1 ?
1
u/SillyFalling Oct 21 '26
Yes- although breaks when you dont exit properly and you have to regen the license
1
u/marcoporz Oct 21 '26
Sorry to ask , how do i exit properly ?
1
u/SillyFalling Oct 21 '26
The X button, although sometimes it just refuses to open.
1
u/Horror_Parsley_6847 12d ago
For some reason there's no X button for my version, lmao. So I got to hope Alt+F4 would be the correct enough way to close it
1
u/Horror_Parsley_6847 12d ago
I went back to windows for months waiting for a guide like this to show up and finally go back to linux. Thank you man, worked beautifully for 21.0 Build 48
1
1
1
1
u/heurikon Aug 18 '26
Mine doesn't run with Nvidia so I have to add prime-run to my .desktop. Just saying
1
u/VivingPudding69 Aug 19 '26
I just wanted to put it here if someone faces the rare problem as mine. On my device resolve's render time was increasing exponentially without the progress bar moving(and my GPU wasn't utilized at all). Problem was with fairlight not hooking in the audio output properly. What worked for me was to change the output temporarily to "Pro Audio" from the mixer.
PS: To test whether it's the same problem or not, export without audio if it renders successfully then it might be the same issue as mine.
1
u/Lucky_Yam9384 Sep 05 '26
A versão estável e final já da pra instalar no pop os 24? Eu tentei mudando algumas coisas mas fica pedindo liçenca uma versão um pouco atrás dessa tinha dado certo
1
1
u/poobers1 Sep 07 '26
I have a really annoying issue, if I'm using nvidia-open, the ones that my CachyOS installation came with, Davinci Resolve Studio shows nothing after the splash screen; I noticed that deleting the DavinciResolve folder from /.local/share fixes it for one boot, as it is not showing the startup screen, and boots me directly into an empty project
has anyone managed to get it working properly with nvidia-open?
1
u/Zlitchufdux Sep 07 '26
Keeps installing 21.0.4-1 and I cant fix it because Resolve keeps crashing on Omarchy.
21.0.4-1 doesnt exist on the website, just 21.0.4
Aur keeps pulling 21.0.4-1
1
1
u/SrinivasImagine Sep 09 '26
Does this work on 21.1? 21.0.4 is working fine.
3
u/PallyLIVE Sep 09 '26
After manually installing the .run file for 21.1 from the BlackMagic website, I can confirm the license steps listed here still work. I'm on CachyOS.
1
1
u/MouuusSe Sep 16 '26
is it working for 21.1? i can through the first launch screen, after that it doesnt get past the startup screen (no gui but still running)
i can reset this by doing rm -r ~/.local/share/DaVinciResolve but that means deleting all my work each time
1
1
u/takooo777 Sep 23 '26
Somebody that can explain this in crayon eating terms plis or a tutorial that explains the basics to understand it
1
u/Poke66666 Sep 27 '26
Does this work for CachyOS I'm on the step 4.1 and after putting binaries to terminal i get this output ;Can't open bin/resolve: No such file or directory.; does anyone have this problem
1
1
u/Calisfed Sep 27 '26
I just update and can confirm 21.1 worked with the above patch in step 4.1
I'm also using CachyOS and just got similar problem. Turned out I'm out of diskspace, so when it installing (running the .run file), it stopped in the middle and just give me the "Finish" button. You should check the
Show details logwhen installing it. Give us the last message as it might indicate the problem.As you also using CachyOS, I suggested you clean up the
Trash dir, remove unneccesary backup (withbtrfs-assistant-launcher) if you also ran out of diskspace like me1
u/Poke66666 Sep 28 '26
i have 2 tb of diskspace left but i will check again if it works also do i just go to the run file before patching with the binary?
1
u/Poke66666 Sep 28 '26
Okay i got it after step 3 you need to go to folder in downloads called davinci-resolve-studio and than go to src and run the DaVinci_Resolve_Studio_21.x.x_Linux.run and after that go to the step 4
1
1
1
u/BenefitSavings9494
Oct 02 '26
•
I was installing DaVinci Resolve Studio 21.1.1 on CachyOS using the
davinci-resolve-studio AUR PKGBUILD.
I initially got:
==> Retrieving sources...
-> Downloading DaVinci_Resolve_Studio_21.1_Linux.zip...
curl: (3) URL rejected: Bad file:// URL
==> ERROR: Failure while downloading file://DaVinci_Resolve_Studio_21.1_Linux.zip
The installer I had was actually:
DaVinci_Resolve_Studio_21.1.1_Linux.zip
So I renamed the ZIP to the filename expected by the PKGBUILD.
Then makepkg found the file, but checksum validation failed:
DaVinci_Resolve_Studio_21.1_Linux.zip ... FAILED
Since I was intentionally using the 21.1.1 installer, I updated the
checksum with:
updpkgsums
After that the checksum passed, but prepare() failed:
chmod: cannot access './DaVinci_Resolve_Studio_21.1_Linux.run':
No such file or directory
The extracted installer was actually:
DaVinci_Resolve_Studio_21.1.1_Linux.run
The PKGBUILD was using ${pkgver}, while pkgver was still 21.1.
I changed:
pkgver=21.1
to:
pkgver=21.1.1
and made sure the local ZIP matched the new version.
After that:
makepkg -si
successfully built and installed:
davinci-resolve-studio 21.1.1-1
DaVinci Resolve is now running successfully on CachyOS.
Hopefully this helps anyone who gets the same 21.1/21.1.1 mismatch.
1
u/Middle_Tension_216 Oct 02 '26
bro ,is resolve working after first launch? for me ,after first launch and inital setup it is runnning fine but after that launchs are not working ,it is running but gui's are getting blocked by software
1
1
u/One-Alternative-191 Oct 04 '26
Yo, I have problem with this Extras Download Manager, I cant install shi, no AI everything just blows up with "Download failed" after minute or two
1
u/Independent_Row_6529 Oct 09 '26
I have the same issue. How to fix ?
1
u/DantooFilms Oct 16 '26
have you found a fix?
1
u/Independent_Row_6529 Oct 16 '26
Nope
2
u/DantooFilms Oct 16 '26
Welp, I think I solved it. I just had to change the permissions of the /opt/resolve/Extras/ folder. It was blocking the download.
1
1
u/SpectpoohEagles Oct 09 '26 edited Oct 09 '26
Beautiful guide, thank you so much. My only worry is when you update it, would it still be okay
Can confirm do not do what I did, I updated to 21.1.1 directly from the launcher, just follow these steps here it'll make it so you have it all back
1
u/Independent_Row_6529 Oct 09 '26
Are you able to download in "Extras Download Manager" ? Mine shows "Download Failed"
1
u/SpectpoohEagles Oct 10 '26
Yeah but it was showing up as failed first too, I looked up a vid on YouTube that fixed the problem
1
u/Leather-Strain-567 Oct 13 '26
Can You tell me Which video? because i've been searching and i found nothing U.U
1
u/Useful_Suggestion_74 Oct 18 '26
genuinly you have all my thanks i have been searching for weeks btw should i download the AlntelliSearch - Better
Allnealisearch - Faster
Al Motion Deblur
AlState D
Al Speech Generator
AlVoice Training
im in version 21.1.1
0
Aug 28 '26
[deleted]
1
u/Ujjwal_Gupta_ Sep 01 '26
The textbook solution is to just encode it into a format like opus, linear wav before editing but some people may have gotten ffmpeg to get working but that might just be for rendering the final video.
2
u/Horekinos Aug 29 '26
i recommend using drwrap. it is going to leave a converted copy though, which will take more storage.
11
u/Crazon6969 Aug 16 '26
thank you for this guide