r/FISKER_MAINTENANCE • • Jun 12 '24

Semi-functional scan tool.

Thumbnail
gallery
31 Upvotes

Thought I would share some info. I’m an auto technician, I work on basically everything including EV. I bought two Oceans at auction and tried one of my Autel scanners on one of them. It had very limited functionality. The Autel scanners I use are tailored to US vehicles. I went on Amazon and bought this cheap Topdon scanner knowing it would have BAIC Arcfox Alpha T/S. I was fairly surprised at what it could do. It could read and clear faults, had a small amount of data that could be monitored, and it would interrogate the modules in the car for version info. That’s really about it though. I’m wondering if a more expensive Chinese scanner could do functions like adaptations and actuator tests.


r/FISKER_MAINTENANCE • • Nov 18 '24

Having issues with your passenger reading lights? Come on in!

Thumbnail
gallery
25 Upvotes

A couple users on the Facebook group found a solution that isn't just disconnecting them. The metal sensor used to turn the light on and off came bent from the factory in a lot of car builds. You need to disconnect the light and then bend the metal sensor to a 90°. The blue line shows where the metal WAS before the fix.

I've attached some photos and a video in the comments showing how to open them up.


r/FISKER_MAINTENANCE • • May 07 '24

META: How we're doing things here.

25 Upvotes

Hey everyone. Thanks for joining the sub. Just wanted to give a quick "why" you might see comments disappear or even posts.

We want this to be a clean and precise sub for owners to find answers. Any unnecessary comments even if they aren't trolling, will be removed. This just keeps it clean and easy for people to find answers to questions they have instead of wading through a bunch of comments.

We will also lock posts once a suitable response has been given when applicable.

Thanks for your help in this and hopefully we can help each other with our cars as well.


r/FISKER_MAINTENANCE • • Jul 28 '24

Fixser has been shut down

23 Upvotes

Just a public service announcement. The ex employee team known as Fixser has been shut down and ghosted a visit in Vegas with owners. They will no longer be allowed to post in this sub. Truly sorry if you were scammed by them.


r/FISKER_MAINTENANCE • • Aug 21 '24

How To Enter Engineering Mode Video

Thumbnail
youtu.be
22 Upvotes

r/FISKER_MAINTENANCE • • Jul 05 '24

Thank you to all contributors

18 Upvotes

A quick note to thank all contributors for all their tips and generosity sharing their knowledge and experience. I traded my Extreme today as the uncertainty became too much for me. However, without the support and help from this community, owners like me would be completely lost. All the best to all of you Ocean owners and thanks again.


r/FISKER_MAINTENANCE • • Sep 24 '24

Improving Handle Lights

Thumbnail
gallery
17 Upvotes

Still developing the process but I noticed when I 3d printed the part as 1 piece, I would always get 1 bad side and have to use support material. So I've printed it in 2 parts with a 3rd piece to act as a jig for gluing.

Also made the top part slightly thinner .8mm to .6mm to increase light transmission.

Also offset the part by .25mm to close the gap a little more and added a chamfer to the top edge to be classy...

Ended up welding the pieces together with a soldering iron. Took less than 5 mins and looks really clean from the top so I will probably stick with this method.

Will test it ASAP & then post the resulting 3d file when it's ready for people to use!


r/FISKER_MAINTENANCE • • Sep 21 '24

A week in the making, here are my thoughts on version 2.2

Thumbnail
youtu.be
17 Upvotes

r/FISKER_MAINTENANCE • • Feb 09 '25

OCEAN DTC DIAG MANUAL

Thumbnail
gallery
16 Upvotes

Hi Ocean Service Providers and DIY Owners. We are making this document available to troubleshoot DTCs. The DTCs can be found using FAST or a 3rd party Scan tool. Access DTC Diag Manual via link below. We are still making changes. It's not completed so we will continue to alter it. This doc is view only. Request access if you'd like to utilize it. We will also release a scan tool with multi functions. This will allow users to read DTCs and Clear DTCs, data logging is also available. More to come once everything is finalized.

https://drive.google.com/file/d/1xP4RkiQJwkXa8zGZGxIno5m5Joxdaob5/view?usp=drive_link


r/FISKER_MAINTENANCE • • Nov 15 '24

FOA had officially released their Dues Sign Up page. Details within:

Thumbnail
app.joinit.com
15 Upvotes

r/FISKER_MAINTENANCE • • Oct 01 '24

Fisker Escape Hatch!

Thumbnail
gallery
15 Upvotes

So watched a video on YouTube were they used a zip tue out the bottom. It worked but I wasn't happy with it. Here's my solution. Fishing line! XD or as the Danish would say, Fisker line! (Idk how their conjugation works but fisker means fisher so let me have this)

1)drill hole & clean up 2)insert rubber strain relief for wires 3) tie it to the emergency pull, I kept both ends long on the fisker line so it can't just unty itself when you're trying to escape.

Took 30 mins and honestly looks like it should be there. If I were to do it again. I would make it more off center. If went I pull the line, it's close enough to the metal wire that the metal wire does go through the hole. But it 100% opens easily and that's all I need for an emergency.

4)need to find a fisk to tie to the end. We've been calling the fisker bluefin so probably go with that!


r/FISKER_MAINTENANCE • • Jul 03 '24

Silence the Alarm!

Thumbnail
youtu.be
15 Upvotes

r/FISKER_MAINTENANCE • • Jun 21 '24

Fisker Ocean DEAD FISKER TROUBLESHOOTING

15 Upvotes

DEAD FISKER = 1 of 2 most likely scenarios.

Scenario 1:

Key fob functions to get in car when battery tender w/ booster function (>20 amp) placed on 12 volt battery. Trickle chargers do not work as Fisker engineers state this does not revive a dead ocean 12 volt battery - 32 modules attempt to draw power and need a high amp battery charger connected once a high amp charger is connected, the charge port should accept a HV connector to charge the main battery now. Keep the charger connected to 12 volt until main battery is above 10%.

IMPORTANT: doggie windows may lose calibration after a dead 12v battery, do not attempt Cali mode until a tech at a readership can re-calibrate that module.

Scenario 2:

Key fob does not function. Attempt to change fob battery. Key not recognized in car. 12 volt battery good. HV battery good. Rear hatch access possible but alarm sounds. Holding to nfc does not work. **Most likely 2.0 part 3 - the update of the PKC module for your key fob has been interrupted and failed. The fob is now erased and needs a dealership with a technician that has a FAST tool and credentials to re-write the fob.


If you need to have your Fisker sent to a confirmed dealer and it will not go in neutral - they will need to place on dollys to get out of garage and lift onto a flat bed or a familiar transportation company needs to transport it.

—————————-

The good news:

According to a Fisker head engineer and technician, the PKC module is the oldest and most difficult to flash. After 2.0 part 3 is successful and the fob opens door with one click or you get 2.1, they should not need to flash that module again and this should not happen again.

It’s a pain to go through that…I empathize with you. But there is a way. God speed.


r/FISKER_MAINTENANCE • • Apr 23 '24

Was told to post about this in here I followed ocean views video here.

Thumbnail
youtu.be
15 Upvotes

I did this and got to see what causes the 12v to drain when it charges ECT I'm comfortable leaving the car on 30sec sleep cycle because I do see the HV actually wakes up to charge the 12v when it starts to drop slightly, no significant drainage after 4 days of letting it sit on 30sec 1% drain max.


r/FISKER_MAINTENANCE • • Jan 04 '25

Door Handle wouldn't pop out- Hard Fuse Reset fixed

14 Upvotes

I got a small win today. My right front passenger door handle wouldn't pop out when unlocking the car. The fix was to remove the rear fuse panel's MF01 for a minute and then re-install.... After that reset it is now working. It had stopped working when I was installing new white inserts in the handles... When I was pressing on the cover to re-glue, the handle slid all the way in and would not power out, though I could pull it out. In other words the manual door open method to open the door still worked. It was only the power function that got confused by me working on the handle.


r/FISKER_MAINTENANCE • • Apr 17 '26

Range after 40k miles

Post image
13 Upvotes

Still going strong, love my FOO


r/FISKER_MAINTENANCE • • Jan 04 '25

Ghost Light Fix

Thumbnail
youtu.be
13 Upvotes

r/FISKER_MAINTENANCE • • Oct 26 '24

Last day to buy the key fobs and cards at the discounted price.

Thumbnail
tsunamiautomotive.com
13 Upvotes

They'll still be available after tomorrow but at the factory price.


r/FISKER_MAINTENANCE • • Feb 19 '25

Fisker Ocean Body Repair Manual

Thumbnail
gallery
12 Upvotes

r/FISKER_MAINTENANCE • • Feb 02 '25

Cabin Filter Replacement

Thumbnail
youtu.be
12 Upvotes

r/FISKER_MAINTENANCE • • Sep 13 '24

UPDATE 2.2 (FULL) - THE FISKER OCEAN EXPERIENCE

Thumbnail
youtu.be
12 Upvotes

r/FISKER_MAINTENANCE • • Sep 05 '24

Fisker iPhone app back online!

12 Upvotes

Randomly opened the app just now, and it connected with my FOO, showing charge status, mileage, etc.


r/FISKER_MAINTENANCE • • Jul 10 '24

Overview of water pump recall and my thoughts on this

Thumbnail
youtu.be
12 Upvotes

r/FISKER_MAINTENANCE • • Jun 08 '24

Fisker Ocean REVIVE A BRICKED 0% BATTERY OCEAN AT HOME

12 Upvotes

EDITED:

THIS is what revived Kristian A. Ulltveit-Moe “bricked” Fisker Ocean - SAVE THIS. He and I are doing a video on it:

IF THE FISKER OCEAN WON’T CHARGE BECAUSE HV BATTERY IS AT 0%:

  1. Symptom is the HV battery is at 0%, and the light is red on charge port. The dash says fault, contact service.

  2. Your charger won’t work on the HV port at this point.

  3. You will need a 20 amp or BETTER 14 volt battery BOX from a hardware store. Any less (trickle, etc) will NOT WORK.

  4. You will ALSO need a LVL 1 EVSE charger at 8 amps only…

  5. Connect the 12v battery box 20amp+ to your 12v battery.

  6. Reduce your LVL 1 EVSE to 8 amps to avoid popping breaker.

  7. Reduce your ocean charging to 8 amps.

—If you have level 2 or 3 then let it rip at 32A, but keep 12 support going until its steady and no alerts—

8. Plug in your HIGH VOLTAGE battery charger with the reduced settings. 9. It should now charge. Let it get at least 20 miles and swap it over to a faster charger. 10. Once the main battery has 20 miles or better, disconnect 12v and go get it charged up as normal.

KEEP IT ABOVE 20% for best practice.

Another trick is to always keep the drivers seat buckled and if you exit the vehicle keep it in Neutral to ensure the vehicle stays in Ready mode and is supporting 12v. Anything less than 6% HV SOC will initiate a safe state and 12v support will taper off. If you exit the vehicle in park or lock the vehicle, the 12v will eventually die.

When a parked vehicle running 2.0+ has a dead 12v it’s almost always at 5% HV SOC.

The trick I mentioned will also keep the rear 110v outlet hot.

You can even close the door and keep the key in your pocket.

It will stay in Neutral and Ready until you open the door again.

If you’re still having issue charging let that 12v charge up for 30 min, then disable HV and disconnect 12v for a reset.

Enable HV then reconnect 12v, immediately start charging 12v again.

It will reset and see good voltage, should clear any errors keeping it from charging HV.

The car really likes 12v and a 2 amp maintainer isn’t going to help.

SAVE THIS


r/FISKER_MAINTENANCE • • Oct 30 '25

Two Year Update

Thumbnail
youtu.be
11 Upvotes