r/Diyautobody • • Nov 22 '25

Project Bought a $20 electric paint gun and tried it on my hood

Thumbnail
gallery
218 Upvotes

Found a good deal in my country for a electric HVLP paint gun which cost roughly $20. Decided to buy it and use it for painting my hood. My hood's paint started cracking a few months ago so I decided to repaint it.

I did all the steps such as sanding off the old paint flat, epoxy primer, 2k primer, 2k base, and 2k clear. Paint came out as expected and it was full of orange peel. However this can be fixed by sanding and buffing.


r/Diyautobody • • Sep 14 '25

Project Painted my 1985 Mazda

Thumbnail
gallery
150 Upvotes

I took this car apart in 2023 and figured it out. The hardest part was figuring out what spray system to use lol. I was on my feet for 14 hours yesterday doing this in my garage, phew!

Mistakes were made but it's red again


r/Diyautobody • • Apr 10 '26 Popcorn

Photo This fell off. Need ideas on what I should do next

Thumbnail
gallery
106 Upvotes

Don’t have any of the bolts or the thing in which it was holding the bolts


r/Diyautobody • • 28d ago

Project Did my first paintjob, came out okay

Thumbnail
gallery
71 Upvotes

After a year of welding, hammering, fill and blocking I finally painted it. It's not perfect but came out alright


r/Diyautobody • • Mar 29 '20

Update: 3 coats of clear down and sitting in the sun. Unfortunately my clear has runs

Post image
48 Upvotes

r/Diyautobody • • Sep 15 '25

Project Buying some time for my dodge, next up rocker panels 🙄

Thumbnail
gallery
46 Upvotes

My 11 ram had wheel rot, budget didnt allow a bed replacement right now or patch panels. Bed is otherwise solid so I welded in back metal and filled it. Got fender flares to cover up the shotty lines but over all its coming along.


r/Diyautobody • • Mar 29 '20

Sprayed khaki metallic basecoat, my first ever paintjob! Clear tomorrow morning

Post image
35 Upvotes

r/Diyautobody • • Aug 10 '25

Question Steel bumper- pull the dent?

Thumbnail
gallery
34 Upvotes

Hi All. I got bummed by a steel street sign that. Came out of nowhere! Now I’ve got a nice dent for the past month in my old tundra steel bumper. Normally, I wouldn’t mind, but it’s the part of the bumper that I step into after getting a boost from my “bed-step” retractable foot pad. I need to bang this back into shape so the plastic cover piece will fit back over the steel. Any idea how to “push or pull” this dent back into the original form? I’m fine drilling a hole to use a slide hammer or welding a tab to attach something, or smashing it from the inside with a big brass rod/sledge. Don’t care about aesthetics, The steel will be covered by the plastic when done. Just need advice on how to DIY this. Thanks.


r/Diyautobody • • Mar 23 '20

A good guide for DIY panel replacement welding for noobs

Post image
33 Upvotes

r/Diyautobody • • Jul 17 '25

Question HELP!! Rental Car Dented!! Any DIY Tips?!

Post image
29 Upvotes

Hello everyone!! My family rented a Chevy Silverado from Enterprise to help my daughter move, and we backed into a pole. The dent is right on the Silverado letters and there is minor paint damage. I am hoping we can get the paint from a Chevy dealership. As for the dent, we have tried everything to get it out and nothing is working. Toilet plungers, sink plungers, dent repair kits with hot glue, and a dent puller. We have contacted multiple local dent repair places and they are all swamped. Does anyone have any DIY tips? We are really trying to avoid the steep damage fees, because we did not pay for the damage insurance. I am turning in the car tomorrow. Any advice is much appreciated!! THANK YOU!!


r/Diyautobody • • Apr 03 '20

Question Tips on panel edge chips.

Post image
26 Upvotes

r/Diyautobody • • Mar 02 '20

Around how much would it cost to paint a car like this. I have a 2001 gt that I plan on painting like this and wanted to see around reddit an estimate of the cost.

Post image
24 Upvotes

r/Diyautobody • • Jan 07 '20

Summer project

Post image
23 Upvotes

r/Diyautobody • • Mar 06 '26

Question Pulling dents out of very thick steel bumper

Thumbnail
gallery
22 Upvotes

Took a solid hit with this pretty thick bumper, was wondering how hard it would be to pull it out and try to get it looking close to normal again and what’s the best way to go about it.


r/Diyautobody • • Feb 13 '25

Question I scratched my hire car (2022 MG3). Can I try and fix it myself or come clean to the company?

Post image
21 Upvotes

l've had a hire car for a few months while my car is being repaired. Recently, I scratched the door while backing out of an underground parking space. I really don't want my dad to know, and I also know that I'll have to pay a lot in damage fees to the hire car company. I've researched how to fix a car scratch at home and it seems like a lot of work, but simple. However, will the hire car company find out that l've covered up a scratch? Do they look that closely? I'm really conflicted, because if they make me pay a damage fees regardless, then I won't spend money on supplies to fix it. Is fixing a car scratch as easy as the videos make it look? (I can't go to a mechanic because 1: it's too ezpensive, and 2: the car is due back in two days.)


r/Diyautobody • • Jan 07 '20

Diyautobody has been created

17 Upvotes

Not in the industry ? Have a question to do it yourself ? Want to share your diy auto body projects ? Here’s the place for you!


r/Diyautobody • • Jun 16 '26

Question Is this fixable?

Thumbnail
gallery
16 Upvotes

LE: Looks like I'm way too worried for nothing. Haven't really dealt with rust before. Gonna wire brush it then seal it and be on my way. Thanks!

Went under the car to replace bushings and brake discs. Noticed that the underbody has quite a bit of rust.

Is this fixable via wire brushing, applying an epoxy primer and then some underbody coating?

What else should I consider?


r/Diyautobody • • Jul 01 '25

Project Let's do some body filling and paint

Thumbnail
gallery
15 Upvotes

Objectives: Don't spend much money or have tools or materials left over. Don't be able to tell the car's been in an accident from across the parking lot. Learn a skill.

In 2021 I got hit in the dog leg at low speed. I proceeded to just ignore it for a couple years but it started developing a bit of rust in the spots where the paint broke all the way through. The quote I got taking it to a body shop was $6,000, as they needed to cut the dog leg and reweld it. So that's about the price of the entire car and continued to ignore it until I started seeing some PDR and painting videos and got a bug to try and repair it. I was also motivated by having semi successfully rattle canned my wife's Nissan to fix its large rust areas.

The dog leg I knocked out as much as possible from the inside of the fender, but that area is double walled and you don't have good access. Even if I had a stud puller it doesn't really pull, something I didn't know until after I tried a pogo stick on it. I was able to pull some small dents on other parts of the car after practicing on the very busted door and realizing the door skin was not going to be remotely fixable with my abilities and that the intrusion bar seemed to be damaged anyway, so, new old junkyard door it is.

With the metal pushed as far as I was able to get it, there was still a large gap, even more evident now that I had a door with a proper body line on it. I built that up with a layer of USC garage Short strand fiberglass followed by a top coat of USC garage 2-in-1 filler/finisher. There was no special reason for choosing these, it's just what they had at my paint shop and I was hoping that was all I was going to need. In retrospect, probably should have gotten a small can of the short strand instead of relying on the pouch, but I was hoping to avoid any extra leftovers. The filler finisher was also a bit lighter than what I actually needed, and you can see that I went back and sanded off a good portion of primer after looking at it the next day and deciding that it looked like crap. Lots of texture showing through from poor sanding. Apathy and exhaustion are the enemies of the uncertain DIYer. Apathy would come back in later because getting a good 800 grit sanded finish on most of the back quarter took hours of wet sanding wet sanding on the 90 degrees heat.

With that done, I got some matching paint cans mixed up at my local Paint Mart, along with some spray Max 2K and some spraymax 1K blending thinner I had left over from my previous job. The paint match on the urethane was great, much better than the generic cans I'd gotten before on internet order for my wife's car. They did however have significantly less in them, I probably needed at least one more can to do the door color change properly. As it was I had some issues with dry spraying since the filled cans really really don't like to spray anything except vertically. The second can ran out before I could do another coat on the door, although I'm not sure that would have fixed my striping issues anyway. The 2K went on beautifully, unbelievably better than the spray acrylic I used before. It's definitely got some dust since I was spraying in my garage with the windows open to try and avoid isocyanate exposure as much as possible, even with my mask and coverings on. While I was at it, I'd also removed, painted and cleared all the door handles since I noticed that they were flaking clear and the new door handle needed to be removed anyway for painting.

Overall, I'm pretty happy with how it came out. There's still a noticeable gap, but it's closed significantly, the body line is back, and the stripiness is really only visible in the sun or in close inspection. There's a few places that need a wet sand or at least a good buff but it's shocking how nicely the 2K goes on even out of a spray can. Definitely respect that stuff though, isocyanate poisoning sounds awful. In case you're wondering, I avoided buying a gun because I'm moving for work soon, and moved here for work. Every tool I buy has to either be sold or fit in a Mazda 3 in a month.


r/Diyautobody • • Jan 04 '26

How to Guide Complete surface rust dot repair guide.

Thumbnail
gallery
14 Upvotes

I have a 2004 F150 that my Dad bought new when I was a teen. I love this truck and plan to keep it forever. It is in amazing shape except for extensive surface rust on the roof. I got several quotes from local shops all in the multiple thousands of dollar range. Way more than I’m comfortable spending. My goal is to stop the rust from spreading and make it look decent. I have time to do the work and money for tools. Will yall help me put together a diy guide of what exactly to buy and how to do it? Thank you.


r/Diyautobody • • Sep 11 '25

Photo Finally lit the candle on this job

Thumbnail
gallery
14 Upvotes

Wild night. I prepped two fenders and got to the seal coat. The first one went off fine. The second one was halfway done when a bat flew in through the gap in my mostly closed garage door. So I messed up the job and had to drop everything to open the garage up for the stupid flying rodent

Anyway the one I didn't mess the seal up on looks ok, except that I found the bug the bat was chasing, probably 😭

1985 RX-7, I stripped the cloudy factory single stage sunrise red and going with base clear classic red from a Miata. More lipstick, less dawn.

Friday I'm shooting the rest of the car, wish me luck


r/Diyautobody • • Apr 05 '20

Question Restore black paint on 1999?

14 Upvotes

Black 1999 Toyota Solara with a couple small rust spots and the paint has some dullness to it.

The car is in good shape and requires a little tlc. The 1999 Solara is a great car and I want to maintain it. I have other projects for the car so I am looking for inexpensive diy options. I'm new to this subreddit so would greatly appreciate any advice.

  1. What is the best product for bringing sheen back to the black coat?

  2. Is there a product out there that will help with restoring the flecks of rust spots on the car? There are two 2x2 patches of rust on the wheel well I plan to sand down. Anyone recommend a product or video?


r/Diyautobody • • Mar 31 '20

Primer on painted rims?

14 Upvotes

Hi everyone,

I am planning to repaint my winter set of rims black. They were painted three years ago when I bought the car however after 3 harsh winters they have some chips and underneath showing.

My question; is primer necessary since the rims are already painted and no longer a “metal surface”?

Instead of 1) clean rims 2) primer 3) paint 4) clear coat

Do I skip the primer?

Thank you for your help.


r/Diyautobody • • Mar 19 '20

2008 Focus coupe need to remove this bumper. All visible bolts attached have been removed, will not budge. Is it welded on?

Post image
14 Upvotes

r/Diyautobody • • Jul 12 '25

Question Is this DIY fixable?

Thumbnail
gallery
13 Upvotes

Front passenger wheel well; hit a curb just wrong on a sharp turn. Two of the pictures show what the damage is. One picture shows the other undamaged side for comparison.

Interim solution was to zip tie it so it’s not flapping in the wind, but it’s straining against the bend in the plastic.

Doable myself or need to take it into the shop?