r/arduino • • Dec 29 '19

Look what I made! Finished my plot clock!

4.3k Upvotes

r/arduino • • Sep 23 '25

Look what I made! My take on a portable e-ink climate logger with custom PCB

Thumbnail
gallery
4.2k Upvotes

I wanted to know how cold it got overnight while camping, so I made this ESP32 based climate logger! It's nothing too special, but the battery lasts 1 week (could be better with software).

It uses a DS3231 clock to wake up the ESP32-S3 from deep sleep every minute to take a climate reading and update the display, so I'm able to get away with a 400 mAh battery.


r/arduino • • May 29 '22

Look what I made! The Octo-Bouncer: Advanced Bouncing Patterns

4.2k Upvotes

r/arduino • • Sep 02 '20

Why do I do this!?

Post image
4.2k Upvotes

r/arduino • • Apr 09 '20

Arduino based weather station Spoiler

Post image
4.1k Upvotes

r/arduino • • Jun 24 '26 Wholesome Seal WOW Hooray Bravo Mindblown

Look what I made! Split-Flap Chess Machine - fully playable now, controller's done

4.1k Upvotes

Hello everyone! I think it’s been about a month since my last update.

Since then, I’ve added a frame and housing to the previous version, which was basically just a bare board, and I’ve also built the controller. My original plan was to use aluminum extrusions for the supports, but I eventually realized they weren’t really necessary and ended up using PETG 3D-printed parts instead. I also enclosed the power supply, wiring, and everything else inside the housing to give it a much cleaner finish.

For the controller, moves are entered by pressing the origin and destination squares on an 8×8 grid of buttons that corresponds directly to the chessboard. I designed the PCB myself and assembled it using mechanical keyboard switches. The display above the controls is a VFD display and I just love the retro look of it.

At this point, I think it’s fair to say that my first engineering project is finally complete. The original plan was to build a second machine so that two people could play against each other, but honestly, I’m pretty exhausted right now, so that part will have to wait for another day.

I’ve also received far more requests for file releases and open-sourcing than I ever expected. Now that the project is reaching the finish line, I’m going to start organizing everything. Since this was my first project, I didn’t pay any attention to documentation or file organization while building it. I appreciate your patience while I sort things out.

Anyway, thank you all so much!


r/arduino • • Jun 28 '20

An Arduino Uno made without any substrate, just wires and components. Made by Kimo Kosaka

Post image
3.9k Upvotes

r/arduino • • May 13 '21

Look what I made! DIY pressure sensor at ZERO COST with materials you definitely have. Super precise and responsive!

3.8k Upvotes

r/arduino • • Nov 20 '25

Here we go, terms of service update from Qualcomm

Post image
3.8k Upvotes

r/arduino • • Oct 04 '25 Bless Up

I Built a Handheld NES From Scratch As My First Embedded Project

3.8k Upvotes

This is my first ever ESP32 and embedded project. I bought the parts and learned how to solder for the first time. For three months, I've been building a handheld NES with an ESP32 from scratch.

While having already made my own NES emulator for Windows, I had to do a whole rewrite of the program to port and optimize it for the ESP32. This is written in C++ and is designed to bring classic NES games to the ESP32. This project focuses on performance, being able to run the emulator at near-native speeds and with full audio emulation implemented. Check out the project!

Here's the GitHub repository if you would like to build it yourself or just take a look!

Github Repository: https://github.com/Shim06/Anemoia-ESP32


r/arduino • • Dec 26 '19

Look what I made! My most useful 3D print to date

Post image
3.8k Upvotes

r/arduino • • Sep 26 '25

My Attempt on an E-Paper Smartwatch

3.7k Upvotes

I wanted to build my own smartwatch for a while without fancy functionalities like heart rate monitoring. My goals were achieving good battery life, notification display and a simple reminder list. I have to say I am really proud of this project and am very happy with it. The smartwatch uses a Nordic nrf52840 chip (is very power efficient especially compared to en ESP), a RX8130 RTC, a BMA400 (tap detection and step counter are possible but not yet implemented), a MAX17048G battery fuel gauge. You can also charge the LiPo with a battery charge IC (with continuous power from VBus). The display ist a small E-Paper display with the driver build into my custom PCB.

I also programmed a companion Android-App to set the time, date and reminders.


r/arduino • • Jul 08 '21

Look what I made! I built an AI controlled robot hand because I couldn't find an internship

3.7k Upvotes

r/arduino • • May 13 '26 Bravo Mindblown Popcorn

Mod's Choice! Finally Done! Full 8x8 Split Flap Chess board

3.7k Upvotes

Hello! I’ve been working like crazy lately, I think I spent over 6 hours a day on it. Thanks to that, I managed to complete the remaining three ranks in a short period of time. Now that all 8 ranks are finished, instead of wanting to take a break, I can finally see the next steps clearly.

Right now, the biggest issue is the weight. The board has become so heavy that it struggles to support its own weight. I’m planning to build a stable support structure using aluminum profiles. Of course, I also want to add a nice-looking frame around the board.

After that, I’ll finally move on to building the controller for operating it. I’m currently deciding between two input methods: entering moves in PGN notation like “Nf3,” or using 64 buttons mapped one-to-one with the board squares to input the source and destination squares directly.

If you’re curious about how this board works, I wrote a short explanation about it here: https://www.reddit.com/r/arduino/s/ReisFfO7fm

I’ll post another update once the controller is finished. Thank you, everyone!


r/arduino • • Mar 20 '21

Look what I found! I saw it, I liked it so much, what do you think about it?

3.6k Upvotes

r/arduino • • Sep 10 '19

Truer words have never been said

Post image
3.5k Upvotes

r/arduino • • Mar 13 '23

Look what I made! ISS Tracker Pedestal - constantly points at the current location of the ISS

3.5k Upvotes

r/arduino • • Aug 09 '21

A Clock I made

3.5k Upvotes

r/arduino • • May 04 '21

Look what I made! Made a Turn Signal Bike Vest (Using LED Strips and a Wireless Remote) - Build Details in the Comments

3.5k Upvotes

r/arduino • • Dec 21 '22

Look what I made! I built a Portal themed e-ink calendar

Post image
3.5k Upvotes

r/arduino • • Mar 29 '20

I put my bike on a stand and connected it to Google Street View with an Arduino

3.4k Upvotes

r/arduino • • Dec 22 '21

Look what I made! I built a full-auto nerf gun that shoots me in the face

3.3k Upvotes

r/arduino • • Feb 20 '21

Look what I made! Hi guys I am 13 years old and this is my first Arduino project i know it's very simple but it's only the first one, i will try to do something more complex in the future, be kind please!

Post image
3.3k Upvotes

r/arduino • • Apr 28 '25

Hardware Help Do you think i can build this myself? I have a 3d printer, arduino and basic skills on them

3.3k Upvotes

I would like to recreate something like this but i dont know if i can do it myself. One of the biggest problems will be to put two hands in a single clock. Any tips are welcome thank you very much!