r/asa_chemistry • • Dec 04 '25

My workload is exploding… would a cheap essay writer help or ruin everything?

31 Upvotes

This entire week has felt like one long academic traffic jam. Every professor assigned something big, every group project suddenly needed updates, and somehow everything is due within the same three-day window. I’m trying to keep up, but between work and constant deadlines, I’m honestly at the point where even opening a blank document feels exhausting. I keep seeing people mention finding a cheap essay writer, but I’m never sure if those suggestions are genuine or just sketchy ads pretending to be helpful.

Part of me wonders if getting outside help would actually make things easier - not in a “let someone else do my whole semester” way, but more in a “help me survive this one chaotic week” kind of way. Still, I’m worried about ending up with something that doesn’t sound like me at all. My writing style isn’t fancy, and if a draft comes back sounding like a polished academic article, my professor will definitely notice something’s off. And the other thing that stresses me out is whether the instructions would actually be followed. Some of my classes have super specific requirements, and if even one part is wrong, I’m the one stuck rewriting everything at 2 a.m.

I’ve also heard mixed stories from people. Some say it helped them get through burnout, others say the writing they got back didn’t match the assignment or had to be heavily edited before turning in. So now I’m stuck in that annoying middle space - overwhelmed enough to think about getting help, but nervous enough to hesitate because I don’t want to create an even bigger problem for myself.

Has anyone here tried this before? Did it help you stay afloat during a heavy week, or did it end up being more stress than support?
Any real experiences - good or bad - would seriously help me figure out what to do next.


r/asa_chemistry • • Jan 16 '26

KillerPapers Review - has anyone here actually tried it?

20 Upvotes

I’ve been deep in that exhausting loop of comparing sites, reading threads, and trying to figure out what’s real vs. what’s just marketing, and KillerPapers Review keeps popping up in my searches. I’m not looking for some magical “A+ guaranteed” thing - I just need help that doesn’t make my life harder than it already is. Right now I’m juggling way too much at once, and the idea of wasting money on something unusable honestly stresses me out more than the assignment itself.

What’s throwing me off is how mixed the opinions seem. Some people act like it’s a solid option if you’re super clear with instructions, but others mention quality being all over the place depending on the writer. I’ve also seen comments about support being either really responsive or basically disappearing when you need a quick fix, which is the worst-case scenario when you’re tight on time. And if the paper comes back sounding overly formal or generic, that’s another headache because then you’re stuck rewriting anyway.

So before I make a decision, I’m curious-if you’ve used it recently, what was your experience actually like? Did you get something you could submit with light edits, or did it turn into a bigger mess than just writing it yourself?


r/asa_chemistry • • Nov 09 '18

Nanome | Virtual Reality Tools for Drug Discovery

Thumbnail
youtube.com
6 Upvotes

r/asa_chemistry • • Aug 14 '17

Questions about Chemistry of Automatic Fire

4 Upvotes

FIRST: I am in NO WAY planning to make a pyrophoric (air-igniting) material at all. This is purely a scholarly question.

So I've been doing some thinking about the whole problem of "Greek Fire." For those that don't know, "Greek Fire," actually called "Liquid Fire" or "Roman fire", was invented by a certain Kallinikos around 650-670 AD for the Roman ("Byzantine") Empire, which famously used it in their navy for centuries before the invention of gunpowder.

The recipe for it doesn't survive, but the recipe for an earlier version does:

"Automatic fire also by the following formula. This is the recipe: take equal amounts of sulphur, rock salt (NaCl with some CaCO3), ashes (charcoal, containing CaCO3, CaO, and K2CO3), thunder stone (limestone, CaCO3 and some CaO), and pyrite (FeS2, mainly) and pound fine in a black mortar at midday sun. Also in equal amounts of each ingredient mix together black mulberry resin and Zakynthian asphault, the latter in a liquid form and free-flowing (naptha), resulting in a product that is sooty colored. Then add to the asphalt the tiniest amount of quicklime (the aforementioned mixture of sulphur, rock salt, ashes, thunder stone, and pyrite). But because the sun is at its zenith, one must pound it carefully and protect the face, for it will ignite suddenly. When it catches fire, one should seal it in some sort of copper receptacle; in this way you will have it available in a box, without exposing it to the sun."

(My additional comments are in bold).

So basically what you have is Sodium Chloride, Calcium Carbonate, Calcium Oxide, Potassium Carbonate, Sulfur, and Iron DiSulfide all acting as accelerant to burn off a mix of Naptha and Pine Tar.

The problem with attempts at modern reconstructions of Greek fire typically only include the Calcium Oxide, using pure modern quicklime. What I'm trying to point out is that ancient quicklime had more compounds in it than purely Calcium Oxide.

What I can't figure out is how this would react. It looks like you're going to be burning Calcium Carbonate down to Calcium Oxide to create more accelerant. But I'm not sure how the other compounds would affect that reaction.

So my questions:

  1. I'm curious as to how the other compounds would affect that process, but as I haven't gotten as far as inorganic yet, my chemistry knowledge isn't advanced enough to figure it out. I figure that the Pyrite is going to leech Sulfuric Acid, the Sodium Chloride and Potassium Carbonate will burn and intensify the fire (particularly with water present).

  2. What would happen if you added Calcium Phosphide to the mixture (made from boiling bones in urine)? Calcium phosphate reacts with water (like Greek fire) to create Phosphine, which is pyrophoric and would intensify the fire (like the historical accounts). Calcium Phosphate has been suggested to have been the active ingredient in Greek Fire.

Asking here and not r/askhistorians because most historians don't know shit about chemistry... lol.

Thank you.


r/asa_chemistry • • May 08 '17

Science connoisseurs of Reddit, I'm writing a fictional story and am looking for a combustible compound that could theoretically be put in money.

4 Upvotes

I'm hoping this is the right sub to post in, but if not does anyone know a better one?

Basically, I'm writing a fictional story where someone places money (it could even be counterfeit, so not the usual linen/cotton material if that would cause a reaction) in a secure vault and it combusts on its own. In this story, vents to the vault can be manipulated so a change in vault atmosphere is possible. Is there a chemical or something a human can lace into money without killing oneself?

This is an odd post, I know. Any suggestions or help would be much appreciated. Thanks!


r/asa_chemistry • • Feb 10 '17

5lbs of dry ice in a car dangerous?

4 Upvotes

Bought some ice cream and it needed some dry ice to keep it cool the ride home ( 5 hour car ride).

Would this amount of dry ice affect the occupants of a mid sized cross over significantly?

Say if the car was closed all 5 hours of the car ride, would the dry ice sublimating create toxic levels of co2?

Edit: No idea the volume of the car, assume the volume of a 2009 Honda CR-V?


r/asa_chemistry • • Feb 09 '17

What is this?

Post image
4 Upvotes

r/asa_chemistry • • Feb 05 '17

How to differentiate between a combustion and formation reaction?

4 Upvotes

Hello, Chemists. I'm struggling to do some change in enthalpy questions because I can't tell if a reaction is that of formation or combustion. Could you tell me what is it about a reaction that gives it away as well as some examples. Thank you:)


r/asa_chemistry • • Dec 13 '16

Saw this graffiti, what does the formula mean?

Thumbnail
i.reddituploads.com
4 Upvotes

r/asa_chemistry • • Oct 22 '17

Can water still freeze if it's constantly moving?

3 Upvotes

Imagine shaking a water bottle in subzero temperatures. Surely the water won't freeze?


r/asa_chemistry • • Sep 22 '17

Helping my parents out? Chemistry noobs?

3 Upvotes

Im pretty into my chemistry, about to start my degree, and my parents often ask what im doing but when i start telling them there eyes glaze over and they just kindof nod. I get this isnt an uncommon thing with science subjects, but i was wondering if anyone knows of any really good books that may help improve there fundamental understanding of chemistry (which is non existant e.g. dont know about aubatomic particles/ structure of an atom).


r/asa_chemistry • • Sep 08 '17

How do you work out the number of moles that's already been reacted given an equation?

3 Upvotes

Hi, I've been trying to do this question but I got a bit stuck.

6 moles of O2 and 5 moles of NH3 are placed in a container at 850 °C. The following reaction proceeds to completion:

4 NH3 + 5 O2 → 4 NO + 6 H2O

If the final total pressure in the container is 5.00 atmospheres, what are the partial pressures of each?

To work out the number of moles reacted, do you just divide by the total number of moles in the product side? Or do you have to do some rebalancing of equations to match how many moles were placed in the container?


r/asa_chemistry • • May 18 '17

Cousin posted this on FB. Wanna know what it is without asking her outright. Any help?

Post image
3 Upvotes

r/asa_chemistry • • Dec 12 '16

What are the heaviest known elements humans have "put to work"?

3 Upvotes

So I'm no chemist but I know at the end of the periodic table are a lot of rare, synthetic, and unstable elements. Working with them in any useful application outside of a lab is basically impossible due to half life, decay, and reactivity. I'm sure a lot of other stuff I'm not aware of too!

But I'm curious about what are the heaviest elements man has gotten to work with successfully. I'd like to request what you chemists think of them within 3 general categories/ideas.

First off is what is the heaviest element we are likely able to encounter day to day in use? I guess on a "consumer" level. I know Uranium is all around us but we don't USE it like we use a bike made of aluminum, iron, silicon, etc. Or like we use a phone with gold components or a gold ring. I know we can have helium balloons too. I'd say mercury can be in here as well because it is in thermometers. Sure that's uncommon now (as well as it being dangerous) but still... encounterable (and can be ordered online).

Next up I say is the category where Uranium would fit. In this one I'm curious about the heaviest element commonly used by mankind. Uranium gets put to use for nuclear power. And everyone experiences man's use of it every day on a mass scale. That said its VERY hard to get a hold of and dangerous. I'd guess any elements belonging to dangerous chemicals would be in this too. Essentially what is the heaviest element used for big time manufacturing or in labs that does have a pretty widely distributed effect. Even if its for a reaction to make something else.

Finally what is just the heaviest element we can actually work with. That we know how to use and put to use. I don't care if it exists for 1 minute in a lab as long as for that minute we put it to use making something for society. I don't care if its as crazy as turning fruit loops into gold for NASA astronauts on an asteroid mission. I mean the heaviest element we can put to use for anything other than theoretical research or a "one off thing" that was never done again.

I'm sure there will be some interpretation here but I'm generally curious what you guys think. Unfortunately most online searches just end up talking about the heaviest elements in general and how rare or short their lifespans are so I figured I should ask!


r/asa_chemistry • • Oct 07 '16

The destruction of potassium.

3 Upvotes

In what ways can potassium be destroyed?

Potassium reacts with a lot of other elements, sometimes spectacularly, and plants remove potassium from soils with varying degrees of permanence. What are the chemical methods involved in destroying potassium and what are some other ways that potassium can be destroyed or permanently 'used up'?


r/asa_chemistry • • Sep 20 '16

Electronic Wave Function?

3 Upvotes

I'm hoping someone can point me in the right direction. I'm not clear on what an electronic wave function is and am working on a Fermi problem that requires me to figure out the wave function for hemoglobin (or a similar protein) so that I can guesstimate the number of electrons. I don't need a solution, just help so I can find it myself. Thank you!


r/asa_chemistry • • Jun 28 '16

I was gifted a beautiful necklace from a friend and chem-geek. Help me identify the chemical structure?

Post image
3 Upvotes

r/asa_chemistry • • Jun 20 '16

Is Avogadro's number even or odd?

3 Upvotes

What is the last digit of Avogadro's number?


r/asa_chemistry • • Mar 14 '16

Looking for a tutor.

3 Upvotes

Hi there. I've been very interested in chemistry for about a year now and for the most part I've been self studying and trying to push the envelope of my understanding but unfortunately I haven't gotten very far. There's a lot of terms that I can't seem to grasp and all it leads to is frustration and a lack of progress. If there is any place you all would recommend to learn chemisty without college (I'm in the military right now so I can pay for school later but I don't want to go in unprepared.) it would be greatly appreciated.


r/asa_chemistry • • Dec 21 '20

Safe way to clean bleach resiude?

2 Upvotes

I went a little overboard with bleach and sprayed it over most of my belongings that were in an outdoor shed with a rat's nest. Now almost everything smells like chlorine (obviously) and has a slight white residue all over it. Apparently I can't use vinegar, or alcohol, and water will re-activate the bleach, so what is the proper way to clean after cleaning with bleach?


r/asa_chemistry • • Oct 30 '19

Battling capillary forces

2 Upvotes

r/asa_chemistry • • Sep 20 '17

Wave-function? Basically an oscilloscope of energy of particles?

2 Upvotes

Started my chemistry degree. Learning about bonding and anti-bonding. Talks about anti-bonded atoms repelling each other and the nodal plane being point zero so no electrons. My questions: Why do the ant-bonded pair repelle one another. How are the anti-bonded pair formed/how and what do they exist as? Because electrons can be thought of as a wave, do they osolate 'up and down' from a sort of +1 to -1 going through point zero? If so, are anti-bonded and bonded molecules formed when the respective electron is in the +1 area or the -1 area or even zero.

I understand this is somewhat ambiguous, even for quantum mechanics, but if anyone can give anykind of adive it would be much apriciated. I habe a sinking feeling im just not understanding what a wave-function is :(.


r/asa_chemistry • • Sep 06 '17

Which has the highest melting point - NaF, NaCl, NaBr, NaI?

2 Upvotes

I've been trying to understand why NaF has the highest melting point among all of the given solids. I thought it would be NaI as it will have the biggest molar mass among them which would mean it has the strongest intermolecular forces. Is it electronegativity difference or molar mass that you look at when analysing intermolecular forces? Am I missing something or misunderstanding something? Thank you very much.


r/asa_chemistry • • Aug 23 '17

Need help clearing up some BS confusion i was taught to do with electrochemistry.

2 Upvotes

during my A-levels (UK) i was taught that in a galvanic/voltaic cell the cathode is negative and the anode is positive. when i search this up i get answers that confirm this and answers that dont, leading to quite alot of confusion. i understand theres something to do with flow of electrons being opposite to charge but i can never find a concise, logical explantion to this. i may be getting confused with an electrolytic cell although i figured there cant be much difference with regards to naming the elctrodes. im about to go into a chemistry degree and figured i should know this so i dont look like an idiot. please dont spare any detail in your answers, i can handle it :)


r/asa_chemistry • • Aug 22 '17

Why is Methanol less dense than Ethanol

2 Upvotes

(in terms of gcm-3) does hydrogen bonding play a role? Is there a trend that otherwise holds for the rest of the alcohols. References would be awesome! Also can anyone explain the trend in phase separation as the percentage of ethanol (or any alcohol) increases in a blend?