98
u/Black_Phoenix_JP May 16 '20 edited May 16 '20
The front of the case makes me remember the old Dell XPS BTX systems - https://img.hexus.net/v2/internationalevents/e3/dell_large_1.jpg
Very futuristic towers for the time, I must say. Well 2006-2012 was a futuristic tower market, from there we had:
Coolermaster Stacker 8XX;
Coolermaster Cosmos;
Thermaltake Level 10;
Silverstone Tenjin TJ11;
Just to mention some.
Glad to see manufacturers and users returning to the aggressive lines of the past, instead of the shoe box style/clean line squared box that were the market in the last 8 years.
30
u/colinreay May 16 '20
I love the look of the old XPS towers. I wanted to do a full SFF recreation of the XPS awhile ago but never got around to it. However, Dell's design aesthetic certainly stuck around in my head and inspired the angle/grill on this.
While I certainly appreciate the minimalist boxy design aesthetic, it is nice to see new designs challenge the status quo!
7
u/Pastoolio91 May 16 '20
I remember that being my dream PC when I was like 14. I ended up getting the slightly lower-tier XPS 400 for Christmas in 2006 and it blew my mind going to that from my Dad's old work laptop. Could finally get above 10 FPS in Call of Duty 2, and was actually able to play through Half-Life 2 for the first time despite owning it for a year and a half at that point. Poor old laptop couldn't even load HL2 up at all.
1
u/FieelChannel May 16 '20
Thermaltake Level 10;
I had that case, worst case I've ever had and I still have nightmares today. Also, it's ugly asf. I had the design with included Watercooling system and it sucked so bad i had to strip it all out and make my own.
Glad to see manufacturers and users returning to the aggressive lines of the past, instead of the shoe box style/clean line squared box that were the market in the last 8 years.
I love minimal designs, I'd hate to see this happen.
21
u/steviesann May 16 '20
Would you consider sharing or selling your designs?
5
u/colinreay May 17 '20
No need to buy! Here's a .step assembly of the case. Please let me know if you need another file type instead.
1
6
18
u/stardog573 May 16 '20
nice work! I feel '80s retro style a little bit
9
u/colinreay May 16 '20
Thanks! I really like the aesthetic of '80s-'90s and even early 2000s tech devices. There's definitely some funky designs out there that would be cool to see a modern twist on.
4
8
u/MrSosaaa May 16 '20
Which 3D printer did you buy?
10
u/colinreay May 16 '20
I got an Ender 5 Plus. Really happy with the prints so far! I printed the case in PLA and did a lot of wet sanding and painting.
5
u/milchking May 16 '20
How did you do the lighting? Is this a panel or are those RGB strips? Do you have a pic of the inside of the front panel?
10
u/colinreay May 16 '20
Here's a photo of how the inside is laid out. I ran a few addressable LED strips horizontally and soldered them together. To test the LED's, I ran them off an external 5v PSU and Arduino but will hook up the Arduino internally and power it using the SFX PSU for the final assembly.
1
2
u/jptuomi May 16 '20
The comparison to the old XPS-cases doesn't do your case justice, a whole other league, god damn! A real beaut! How's air flow?
1
u/colinreay May 17 '20
Thanks! Airflow should be... okay; with the side vent grills on, the case is your standard sandwich layout with vents out the back. My components aren't very thermally intensive (my GPU fan remains idle during mosy daily use) so I wasn't too worried about overheating.
To optimize the airflow, adding vents to the top would be my first choice. Putting vents there should allow for more unrestricted GPU exhaust.
1
4
6
May 16 '20
I'm personally not a fan of the gloss red. I'd prefer matte. That or floss black.
1
u/mstafsta May 16 '20
I think gloss fits the retro theme better. But I’m also curious how a black front would look like.
2
2
2
2
May 16 '20 edited May 16 '20
Beatiful desgin! And yeah, it is tasteful AF! Love the front panel and RGB layout.
I guess you printed it with the back par in the bed of the printer, did you have any problem with the supports for the windows on each side? What slicing software did you use? I use Simplify 3D, but last time I did I was not that happy with hoe the supports behave during printing, failing on the edges.
2
May 16 '20
This is a really sexy build! The front remind me of the old transistor radio back in 40s, and RGB is a really nice touch to make it look more "futurist".
2
2
u/plamicus May 16 '20
Looks fantastic. Really great job!
If I were doing a case like this I think a black case with a mid-tone grey grill with white lighting (or something pale like light blue, or green) would look sick. I'm Mr. Boring with this sort of thing though.
2
2
u/VEC7OR May 16 '20 edited May 16 '20
Beautiful case, but RGB can go die in a whoring accident, limit it to a few colors that complement the color theme of the case.
White should look good or white + red wave, green is complementary to red, but not sure if it will work out here.
1
1
1
1
1
u/Evey9207 May 16 '20
This is beautiful, man! Whit the color scheme and the angled grill you hit a sweet spot between Outrun and Cyberpunk.
If 3D printing was available where I live I would definitely print one for myself.
1
u/TheWildTeo May 16 '20
That looks awesome! Maybe you could make it so that you could switch out the front grille for different colour schemes
1
1
1
1
1
1
u/toastednutella May 16 '20
i'd say if that front panel was a bit more colour neutral, say in a shade of grey, that would be pretty damn clean
1
1
1
1
1
u/dmizz May 16 '20
Sometimes I’m shocked by the level of fit and finish people can get with DIY projects. This is incredible!
1
u/workaccountoftoday May 16 '20
You're gonna have to make a custom cover for the graphics card/side to balance out the front
looks slick af though, share some vids of the front panel in motion!
1
1
1
u/His_Turdness May 17 '20
I don't like RGB in general, but this thing looks really great. Well done. Now where do I buy it? :P
Or how do I print it?
1
-2
u/Vindictive_Turnip May 16 '20
If the front were polished aluminum or steel that case would be sweet. Otherwise, imho, it looks cheap and kinda tacky.
0
76
u/colinreay May 16 '20
Hey everyone!
I want to share a little project I've been working on. I recently got a large 3D printer and thought making a new case would be a perfect way to break the printer in.
The case isn't quite done - I still need to install the side grills and all components. The layout is is a simple sandwich with a SFX PSU on the bottom. I'll be posting final pictures shortly!
Here are some more pictures of the case as it currently stands. I'm usually not a fan of RGB but think the implementation here is not too gaudy (especially since I can run it in single color mode).
Well, that's it! I have a few more fun case designs coming in the near future. If you have any questions, I'd be happy to answer them.
Thanks!